This is a toy implementation of an encrypted IPv6 network, with many good ideas stolen from [cjdns](https://github.com/cjdelisle/cjdns), which was written to test a particular routing scheme that was cobbled together one random afternoon.
It's notably not a shortest path routing scheme, with the goal of scalable name-independent routing on dynamic networks with an internet-like topology.
It's named Yggdrasil after the world tree from Norse mythology, because that seemed like the obvious name given how it works.
For a longer, rambling version of this readme with more information, see: [doc](doc/README.md).
This is a toy / proof-of-principle, so it's not even alpha quality software--any nontrivial update is likely to break backwards compatibility with no possibility for a clean upgrade path.
Note that you can cross-compile for other platforms and architectures by specifying the `$GOOS` and `$GOARCH` environment variables, for example, `GOOS=windows ./build` or `GOOS=linux GOARCH=mipsle ./build`.
The build script sets its own `$GOPATH`, so the build environment is self-contained.
## Running
To run the program, you'll need permission to create a `tun` device and configure it using `ip`.
If you don't want to mess with capabilities for the `tun` device, then using `sudo` should work, with the usual security caveats about running a program as root.
To run with default settings:
1.`./yggdrasil --autoconf`
That will generate a new set of keys (and an IP address) each time the program is run.
The program will bind to all addresses on a random port and listen for incoming connections.
It will send announcements over IPv6 link-local multicast, and it will attempt to start a connection if it hears an announcement from another device.
In practice, you probably want to run this instead:
1.`./yggdrasil --genconf > conf.json`
2.`./yggdrasil --useconf < conf.json`
This keeps a persistent set of keys (and by extension, IP address) and gives you the option of editing the configuration file.
If you want to use it as an overlay network on top of e.g. the internet, then you can do so by adding the remote devices domain/address and port (as a string, e.g. `"1.2.3.4:5678"`) to the list of `Peers` in the configuration file.
You can control whether or not it peers over TCP or UDP by adding `tcp:` or `udp:` to the start of the string, i.e. `"udp:1.2.3.4:5678"`.
It is currently configured to accept incoming TCP and UDP connections.
In the interest of testing the TCP machinery, it's set to create TCP connections for auto-peering (over link-local IPv6), and to use TCP by default if no transport is specified for a manually configured peer.
- systemd service scripts are included in the `contrib/systemd/` folder so that it runs automatically in the background (using `/etc/yggdrasil.conf` for configuration), copy the service files into `/etc/systemd/system`, copy `yggdrasil` into your `$PATH`, i.e. `/usr/bin`, and then enable the service:
- Tested and working on Windows 7 and Windows 10, and should work on any recent versions of Windows, but it depends on the [OpenVPN TAP driver](https://openvpn.net/index.php/open-source/downloads.html) being installed first.
- Has been proven to work with both the [NDIS 5](https://swupdate.openvpn.org/community/releases/tap-windows-9.9.2_3.exe) (`tap-windows-9.9.2_3`) driver and the [NDIS 6](https://swupdate.openvpn.org/community/releases/tap-windows-9.21.2.exe) (`tap-windows-9.21.2`) driver, however there are substantial performance issues with the NDIS 6 driver therefore it is recommended to use the NDIS 5 driver instead.
- Be aware that connectivity issues can occur on Windows if multiple IPv6 addresses from the `fd00::/8` prefix are assigned to the TAP interface. If this happens, then you may need to manually remove the old/unused addresses from the interface (though the code has a workaround in place to do this automatically in some cases).
Suppose a node has generated the address: `fd00:1111:2222:3333:4444:5555:6666:7777`
Then the node may also use addresses from the prefix: `fd80:1111:2222:3333::/64` (note the `fd00` changed to `fd80`, a separate `/9` is used for prefixes, but the rest of the first 64 bits are the same).
1. Enable IPv6 forwarding (e.g. `sysctl -w net.ipv6.conf.all.forwarding=1` or add it to sysctl.conf).
2.`ip addr add fd80:1111:2222:3333::1/64 dev eth0` or similar, to assign an address for the router to use in that prefix, where the LAN is reachable through `eth0`.
3. Install/run `radvd` with something like the following in `/etc/radvd.conf`:
This is enough to give unsupported devices on the LAN access to the yggdrasil network, with a few security and performance cautions outlined in the [doc](doc/README.md) file.
I'd rather not try to explain in the readme, but it is described further in the [doc](doc/README.md) file or the very draft of a [whitepaper](doc/Whitepaper.md), so you can check there if you're interested.
A [simplified model](misc/sim/treesim-forward.py) of this routing scheme has been tested in simulation on the 9204-node [skitter](https://www.caida.org/tools/measurement/skitter/) network topology dataset from [caida](https://www.caida.org/), and compared with results in [arxiv:0708.2309](https://arxiv.org/abs/0708.2309).
Using the routing scheme as implemented in this code, the average multiplicative stretch is observed to be about 1.08, with an average routing table size of 6 for a name-dependent scheme, and approximately 30 additional (but smaller) entries needed for the name-independent routing table.
The number of name-dependent routing table entries needed is proportional to node degree, so that 6 is the mean of a distribution with a long tail, but this may be an acceptable tradeoff(it's at least worth trying, hence this code).
The size of name-dependent routing table entries is relatively large, due to cryptographic signatures associated with routing table updates, but in the absence of cryptographic overhead, each entry should otherwise be comparable in size to the BC routing scheme described in the above paper.
A modified version of this scheme, with the same resource requirements, achieves a multiplicative stretch of 1.02, which drops to 1.01 if source routing is used.
Both of these optimizations are not present in the current implementation, as the former depends on network state information that appears difficult to cryptographically secure, and the latter optimization is both tedious to implement and would make debugging other aspects of the implementation more difficult.
This code is released under the terms of the LGPLv3, but with an added exception that was shamelessly taken from [godeb](https://github.com/niemeyer/godeb).
Under certain circumstances, this exception permits distribution of binaries that are (statically or dynamically) linked with this code, without requiring the distribution of Minimal Corresponding Source or Minimal Application Code.
