cwinfo/yggdrasil-go
5
0
Fork 0
mirror of https://github.com/cwinfo/yggdrasil-go.git synced 2024-11-26 07:11:40 +00:00
Code Releases Activity

Merge pull request #128 from Arceliar/doc

Browse Source 
address range changes
This commit is contained in:
Arceliar 2018-06-14 13:36:49 -05:00 committed by GitHub
commit 28d187d5a0
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
README.md
View File

@ -85,7 +85,7 @@ journalctl -u yggdrasil
- Tested and working on Windows 7 and Windows 10, and should work on any recent versions of Windows, but it depends on the [OpenVPN TAP driver](https://openvpn.net/index.php/open-source/downloads.html) being installed first.
- Has been proven to work with both the [NDIS 5](https://swupdate.openvpn.org/community/releases/tap-windows-9.9.2_3.exe) (`tap-windows-9.9.2_3`) driver and the [NDIS 6](https://swupdate.openvpn.org/community/releases/tap-windows-9.21.2.exe) (`tap-windows-9.21.2`) driver, however there are substantial performance issues with the NDIS 6 driver therefore it is recommended to use the NDIS 5 driver instead.
- Be aware that connectivity issues can occur on Windows if multiple IPv6 addresses from the `fd00::/8` prefix are assigned to the TAP interface. If this happens, then you may need to manually remove the old/unused addresses from the interface (though the code has a workaround in place to do this automatically in some cases).
- Be aware that connectivity issues can occur on Windows if multiple IPv6 addresses from the `200::/7` prefix are assigned to the TAP interface. If this happens, then you may need to manually remove the old/unused addresses from the interface (though the code has a workaround in place to do this automatically in some cases).
- TUN mode is not supported on Windows.
- Yggdrasil can be installed as a Windows service so that it runs automatically in the background. From an Administrator Command Prompt:
```
@ -105,26 +105,26 @@ sc create yggdrasil binpath= "\"C:\path\to\yggdrasil.exe\" -autoconf"
## Optional: advertise a prefix locally
Suppose a node has generated the address: `fd00:1111:2222:3333:4444:5555:6666:7777`
Suppose a node has generated the address: `200:1111:2222:3333:4444:5555:6666:7777`
Then the node may also use addresses from the prefix: `fd80:1111:2222:3333::/64` (note the `fd00` changed to `fd80`, a separate `/9` is used for prefixes, but the rest of the first 64 bits are the same).
Then the node may also use addresses from the prefix: `300:1111:2222:3333::/64` (note the `200` changed to `300`, a separate `/8` is used for prefixes, but the rest of the first 64 bits are the same).
To advertise this prefix and a route to `fd00::/8`, the following seems to work on the developers' networks:
To advertise this prefix and a route to `200::/7`, the following seems to work on the developers' networks:
1. Enable IPv6 forwarding (e.g. `sysctl -w net.ipv6.conf.all.forwarding=1` or add it to sysctl.conf).
2. `ip addr add fd80:1111:2222:3333::1/64 dev eth0` or similar, to assign an address for the router to use in that prefix, where the LAN is reachable through `eth0`.
2. `ip addr add 300:1111:2222:3333::1/64 dev eth0` or similar, to assign an address for the router to use in that prefix, where the LAN is reachable through `eth0`.
3. Install/run `radvd` with something like the following in `/etc/radvd.conf`:
```
interface eth0
{
AdvSendAdvert on;
prefix fd80:1111:2222:3333::/64 {
prefix 300:1111:2222:3333::/64 {
AdvOnLink on;
AdvAutonomous on;
};
route fd00::/8 {};
route 200::/7 {};
};
```