Merge remote-tracking branch 'origin/develop' into metadata

cmd/yggdrasil/main.go

@@ -12,6 +12,7 @@ import (
 	"os"
 	"os/signal"
 	"regexp"
+	"strings"
 	"syscall"
 	"time"
 
@@ -188,6 +189,31 @@ func main() {
 				}
 			}
 		}
+		// Check to see if the peers are in a parsable format, if not then default
+		// them to the TCP scheme
+		for index, peer := range dat["Peers"].([]interface{}) {
+			uri := peer.(string)
+			if strings.HasPrefix(uri, "tcp://") || strings.HasPrefix(uri, "socks://") {
+				continue
+			}
+			if strings.HasPrefix(uri, "tcp:") {
+				uri = uri[4:]
+			}
+			(dat["Peers"].([]interface{}))[index] = "tcp://" + uri
+		}
+		// Now do the same with the interface peers
+		for intf, peers := range dat["InterfacePeers"].(map[string]interface{}) {
+			for index, peer := range peers.([]interface{}) {
+				uri := peer.(string)
+				if strings.HasPrefix(uri, "tcp://") || strings.HasPrefix(uri, "socks://") {
+					continue
+				}
+				if strings.HasPrefix(uri, "tcp:") {
+					uri = uri[4:]
+				}
+				((dat["InterfacePeers"].(map[string]interface{}))[intf]).([]interface{})[index] = "tcp://" + uri
+			}
+		}
 		// Overlay our newly mapped configuration onto the autoconf node config that
 		// we generated above.
 		if err = mapstructure.Decode(dat, &cfg); err != nil {

src/yggdrasil/adapter.go

@@ -0,0 +1,25 @@
+package yggdrasil
+
+// Defines the minimum required functions for an adapter type.
+type AdapterInterface interface {
+	init(core *Core, send chan<- []byte, recv <-chan []byte)
+	read() error
+	write() error
+	close() error
+}
+
+// Defines the minimum required struct members for an adapter type (this is
+// now the base type for tunAdapter in tun.go)
+type Adapter struct {
+	AdapterInterface
+	core *Core
+	send chan<- []byte
+	recv <-chan []byte
+}
+
+// Initialises the adapter.
+func (adapter *Adapter) init(core *Core, send chan<- []byte, recv <-chan []byte) {
+	adapter.core = core
+	adapter.send = send
+	adapter.recv = recv
+}

src/yggdrasil/admin.go

@@ -160,9 +160,9 @@ func (a *admin) init(c *Core, listenaddr string) {
 		}()
 
 		return admin_info{
-			a.core.tun.iface.Name(): admin_info{
-				"tap_mode": a.core.tun.iface.IsTAP(),
-				"mtu":      a.core.tun.mtu,
+			a.core.router.tun.iface.Name(): admin_info{
+				"tap_mode": a.core.router.tun.iface.IsTAP(),
+				"mtu":      a.core.router.tun.mtu,
 			},
 		}, nil
 	})
@@ -185,8 +185,8 @@ func (a *admin) init(c *Core, listenaddr string) {
 			return admin_info{}, errors.New("Failed to configure adapter")
 		} else {
 			return admin_info{
-				a.core.tun.iface.Name(): admin_info{
-					"tap_mode": a.core.tun.iface.IsTAP(),
+				a.core.router.tun.iface.Name(): admin_info{
+					"tap_mode": a.core.router.tun.iface.IsTAP(),
 					"mtu":      ifmtu,
 				},
 			}, nil
@@ -523,13 +523,7 @@ func (a *admin) addPeer(addr string, sintf string) error {
 			return errors.New("invalid peer: " + addr)
 		}
 	} else {
-		// no url scheme provided
-		addr = strings.ToLower(addr)
-		if strings.HasPrefix(addr, "tcp:") {
-			addr = addr[4:]
-		}
-		a.core.tcp.connect(addr, "")
-		return nil
+		return errors.New("invalid peer: " + addr)
 	}
 	return nil
 }
@@ -547,12 +541,12 @@ func (a *admin) removePeer(p string) error {
 // startTunWithMTU creates the tun/tap device, sets its address, and sets the MTU to the provided value.
 func (a *admin) startTunWithMTU(ifname string, iftapmode bool, ifmtu int) error {
 	// Close the TUN first if open
-	_ = a.core.tun.close()
+	_ = a.core.router.tun.close()
 	// Then reconfigure and start it
 	addr := a.core.router.addr
 	straddr := fmt.Sprintf("%s/%v", net.IP(addr[:]).String(), 8*len(address_prefix)-1)
 	if ifname != "none" {
-		err := a.core.tun.setup(ifname, iftapmode, straddr, ifmtu)
+		err := a.core.router.tun.setup(ifname, iftapmode, straddr, ifmtu)
 		if err != nil {
 			return err
 		}
@@ -567,9 +561,9 @@ func (a *admin) startTunWithMTU(ifname string, iftapmode bool, ifmtu int) error
 			a.core.sessions.sendPingPong(sinfo, false)
 		}
 		// Aaaaand... go!
-		go a.core.tun.read()
+		go a.core.router.tun.read()
 	}
-	go a.core.tun.write()
+	go a.core.router.tun.write()
 	return nil
 }
 

src/yggdrasil/core.go

@@ -28,7 +28,6 @@ type Core struct {
 	sessions    sessions
 	router      router
 	dht         dht
-	tun         tunDevice
 	admin       admin
 	searches    searches
 	multicast   multicast
@@ -60,7 +59,6 @@ func (c *Core) init(bpub *boxPubKey,
 	c.peers.init(c)
 	c.router.init(c)
 	c.switchTable.init(c, c.sigPub) // TODO move before peers? before router?
-	c.tun.init(c)
 }
 
 // Get the current build name. This is usually injected if built from git,
@@ -192,7 +190,7 @@ func (c *Core) Start(nc *config.NodeConfig, log *log.Logger) error {
 	}
 
 	ip := net.IP(c.router.addr[:]).String()
-	if err := c.tun.start(nc.IfName, nc.IfTAPMode, fmt.Sprintf("%s/%d", ip, 8*len(address_prefix)-1), nc.IfMTU); err != nil {
+	if err := c.router.tun.start(nc.IfName, nc.IfTAPMode, fmt.Sprintf("%s/%d", ip, 8*len(address_prefix)-1), nc.IfMTU); err != nil {
 		c.log.Println("Failed to start TUN/TAP")
 		return err
 	}
@@ -204,7 +202,7 @@ func (c *Core) Start(nc *config.NodeConfig, log *log.Logger) error {
 // Stops the Yggdrasil node.
 func (c *Core) Stop() {
 	c.log.Println("Stopping...")
-	c.tun.close()
+	c.router.tun.close()
 	c.admin.close()
 }
 
@@ -307,10 +305,10 @@ func (c *Core) GetTUNDefaultIfTAPMode() bool {
 
 // Gets the current TUN/TAP interface name.
 func (c *Core) GetTUNIfName() string {
-	return c.tun.iface.Name()
+	return c.router.tun.iface.Name()
 }
 
 // Gets the current TUN/TAP interface MTU.
 func (c *Core) GetTUNIfMTU() int {
-	return c.tun.mtu
+	return c.router.tun.mtu
 }

src/yggdrasil/debug.go

@@ -68,11 +68,11 @@ func (c *Core) DEBUG_getEncryptionPublicKey() boxPubKey {
 }
 
 func (c *Core) DEBUG_getSend() chan<- []byte {
-	return c.tun.send
+	return c.router.tun.send
 }
 
 func (c *Core) DEBUG_getRecv() <-chan []byte {
-	return c.tun.recv
+	return c.router.tun.recv
 }
 
 // Peer
@@ -304,18 +304,18 @@ func (c *Core) DEBUG_startTunWithMTU(ifname string, iftapmode bool, mtu int) {
 	addr := c.DEBUG_getAddr()
 	straddr := fmt.Sprintf("%s/%v", net.IP(addr[:]).String(), 8*len(address_prefix))
 	if ifname != "none" {
-		err := c.tun.setup(ifname, iftapmode, straddr, mtu)
+		err := c.router.tun.setup(ifname, iftapmode, straddr, mtu)
 		if err != nil {
 			panic(err)
 		}
-		c.log.Println("Setup TUN/TAP:", c.tun.iface.Name(), straddr)
-		go func() { panic(c.tun.read()) }()
+		c.log.Println("Setup TUN/TAP:", c.router.tun.iface.Name(), straddr)
+		go func() { panic(c.router.tun.read()) }()
 	}
-	go func() { panic(c.tun.write()) }()
+	go func() { panic(c.router.tun.write()) }()
 }
 
 func (c *Core) DEBUG_stopTun() {
-	c.tun.close()
+	c.router.tun.close()
 }
 
 ////////////////////////////////////////////////////////////////////////////////
@@ -546,7 +546,7 @@ func DEBUG_simLinkPeers(p, q *peer) {
 }
 
 func (c *Core) DEBUG_simFixMTU() {
-	c.tun.mtu = 65535
+	c.router.tun.mtu = 65535
 }
 
 ////////////////////////////////////////////////////////////////////////////////

src/yggdrasil/icmpv6.go

@@ -24,7 +24,7 @@ type macAddress [6]byte
 const len_ETHER = 14
 
 type icmpv6 struct {
-	tun      *tunDevice
+	tun      *tunAdapter
 	mylladdr net.IP
 	mymac    macAddress
 	peermacs map[address]neighbor
@@ -57,7 +57,7 @@ func ipv6Header_Marshal(h *ipv6.Header) ([]byte, error) {
 // Initialises the ICMPv6 module by assigning our link-local IPv6 address and
 // our MAC address. ICMPv6 messages will always appear to originate from these
 // addresses.
-func (i *icmpv6) init(t *tunDevice) {
+func (i *icmpv6) init(t *tunAdapter) {
 	i.tun = t
 	i.peermacs = make(map[address]neighbor)
 

src/yggdrasil/router.go

@@ -39,6 +39,8 @@ type router struct {
 	in        <-chan []byte          // packets we received from the network, link to peer's "out"
 	out       func([]byte)           // packets we're sending to the network, link to peer's "in"
 	toRecv    chan router_recvPacket // packets to handle via recvPacket()
+	tun       tunAdapter             // TUN/TAP adapter
+	adapters  []Adapter              // Other adapters
 	recv      chan<- []byte          // place where the tun pulls received packets from
 	send      <-chan []byte          // place where the tun puts outgoing packets
 	reset     chan struct{}          // signal that coords changed (re-init sessions/dht)
@@ -75,12 +77,10 @@ func (r *router) init(core *Core) {
 	send := make(chan []byte, 32)
 	r.recv = recv
 	r.send = send
-	r.core.tun.recv = recv
-	r.core.tun.send = send
 	r.reset = make(chan struct{}, 1)
 	r.admin = make(chan func(), 32)
 	r.cryptokey.init(r.core)
-	// go r.mainLoop()
+	r.tun.init(r.core, send, recv)
 }
 
 // Starts the mainLoop goroutine.
@@ -267,25 +267,6 @@ func (r *router) sendPacket(bs []byte) {
 		// Drop packets if the session MTU is 0 - this means that one or other
 		// side probably has their TUN adapter disabled
 		if sinfo.getMTU() == 0 {
-			// Get the size of the oversized payload, up to a max of 900 bytes
-			window := 900
-			if len(bs) < window {
-				window = len(bs)
-			}
-
-			// Create the Destination Unreachable response
-			ptb := &icmp.DstUnreach{
-				Data: bs[:window],
-			}
-
-			// Create the ICMPv6 response from it
-			icmpv6Buf, err := r.core.tun.icmpv6.create_icmpv6_tun(
-				bs[8:24], bs[24:40],
-				ipv6.ICMPTypeDestinationUnreachable, 1, ptb)
-			if err == nil {
-				r.recv <- icmpv6Buf
-			}
-
 			// Don't continue - drop the packet
 			return
 		}
@@ -304,7 +285,7 @@ func (r *router) sendPacket(bs []byte) {
 			}
 
 			// Create the ICMPv6 response from it
-			icmpv6Buf, err := r.core.tun.icmpv6.create_icmpv6_tun(
+			icmpv6Buf, err := r.tun.icmpv6.create_icmpv6_tun(
 				bs[8:24], bs[24:40],
 				ipv6.ICMPTypePacketTooBig, 0, ptb)
 			if err == nil {

src/yggdrasil/session.go

@@ -281,7 +281,7 @@ func (ss *sessions) createSession(theirPermKey *boxPubKey) *sessionInfo {
 	sinfo.mySesPriv = *priv
 	sinfo.myNonce = *newBoxNonce()
 	sinfo.theirMTU = 1280
-	sinfo.myMTU = uint16(ss.core.tun.mtu)
+	sinfo.myMTU = uint16(ss.core.router.tun.mtu)
 	now := time.Now()
 	sinfo.time = now
 	sinfo.mtuTime = now

src/yggdrasil/tun.go

@@ -17,11 +17,9 @@ const tun_IPv6_HEADER_LENGTH = 40
 const tun_ETHER_HEADER_LENGTH = 14
 
 // Represents a running TUN/TAP interface.
-type tunDevice struct {
-	core   *Core
+type tunAdapter struct {
+	Adapter
 	icmpv6 icmpv6
-	send   chan<- []byte
-	recv   <-chan []byte
 	mtu    int
 	iface  *water.Interface
 }
@@ -36,14 +34,14 @@ func getSupportedMTU(mtu int) int {
 }
 
 // Initialises the TUN/TAP adapter.
-func (tun *tunDevice) init(core *Core) {
-	tun.core = core
+func (tun *tunAdapter) init(core *Core, send chan<- []byte, recv <-chan []byte) {
+	tun.Adapter.init(core, send, recv)
 	tun.icmpv6.init(tun)
 }
 
 // Starts the setup process for the TUN/TAP adapter, and if successful, starts
 // the read/write goroutines to handle packets on that interface.
-func (tun *tunDevice) start(ifname string, iftapmode bool, addr string, mtu int) error {
+func (tun *tunAdapter) start(ifname string, iftapmode bool, addr string, mtu int) error {
 	if ifname == "none" {
 		return nil
 	}
@@ -75,7 +73,7 @@ func (tun *tunDevice) start(ifname string, iftapmode bool, addr string, mtu int)
 // Writes a packet to the TUN/TAP adapter. If the adapter is running in TAP
 // mode then additional ethernet encapsulation is added for the benefit of the
 // host operating system.
-func (tun *tunDevice) write() error {
+func (tun *tunAdapter) write() error {
 	for {
 		data := <-tun.recv
 		if tun.iface == nil {
@@ -164,7 +162,7 @@ func (tun *tunDevice) write() error {
 // is running in TAP mode then the ethernet headers will automatically be
 // processed and stripped if necessary. If an ICMPv6 packet is found, then
 // the relevant helper functions in icmpv6.go are called.
-func (tun *tunDevice) read() error {
+func (tun *tunAdapter) read() error {
 	mtu := tun.mtu
 	if tun.iface.IsTAP() {
 		mtu += tun_ETHER_HEADER_LENGTH
@@ -201,7 +199,7 @@ func (tun *tunDevice) read() error {
 // Closes the TUN/TAP adapter. This is only usually called when the Yggdrasil
 // process stops. Typically this operation will happen quickly, but on macOS
 // it can block until a read operation is completed.
-func (tun *tunDevice) close() error {
+func (tun *tunAdapter) close() error {
 	if tun.iface == nil {
 		return nil
 	}

src/yggdrasil/tun_bsd.go

@@ -77,7 +77,7 @@ type in6_ifreq_lifetime struct {
 // a system socket and making syscalls to the kernel. This is not refined though
 // and often doesn't work (if at all), therefore if a call fails, it resorts
 // to calling "ifconfig" instead.
-func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int) error {
+func (tun *tunAdapter) setup(ifname string, iftapmode bool, addr string, mtu int) error {
 	var config water.Config
 	if ifname[:4] == "auto" {
 		ifname = "/dev/tap0"
@@ -103,7 +103,7 @@ func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int)
 	return tun.setupAddress(addr)
 }
 
-func (tun *tunDevice) setupAddress(addr string) error {
+func (tun *tunAdapter) setupAddress(addr string) error {
 	var sfd int
 	var err error
 

src/yggdrasil/tun_darwin.go

@@ -14,7 +14,7 @@ import (
 )
 
 // Configures the "utun" adapter with the correct IPv6 address and MTU.
-func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int) error {
+func (tun *tunAdapter) setup(ifname string, iftapmode bool, addr string, mtu int) error {
 	if iftapmode {
 		tun.core.log.Printf("TAP mode is not supported on this platform, defaulting to TUN")
 	}
@@ -62,7 +62,7 @@ type ifreq struct {
 
 // Sets the IPv6 address of the utun adapter. On Darwin/macOS this is done using
 // a system socket and making direct syscalls to the kernel.
-func (tun *tunDevice) setupAddress(addr string) error {
+func (tun *tunAdapter) setupAddress(addr string) error {
 	var fd int
 	var err error
 

src/yggdrasil/tun_linux.go

@@ -13,7 +13,7 @@ import (
 )
 
 // Configures the TAP adapter with the correct IPv6 address and MTU.
-func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int) error {
+func (tun *tunAdapter) setup(ifname string, iftapmode bool, addr string, mtu int) error {
 	var config water.Config
 	if iftapmode {
 		config = water.Config{DeviceType: water.TAP}
@@ -48,7 +48,7 @@ func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int)
 // is used to do this, so there is not a hard requirement on "ip" or "ifconfig"
 // to exist on the system, but this will fail if Netlink is not present in the
 // kernel (it nearly always is).
-func (tun *tunDevice) setupAddress(addr string) error {
+func (tun *tunAdapter) setupAddress(addr string) error {
 	// Set address
 	var netIF *net.Interface
 	ifces, err := net.Interfaces()

src/yggdrasil/tun_other.go

@@ -9,7 +9,7 @@ import water "github.com/yggdrasil-network/water"
 
 // Creates the TUN/TAP adapter, if supported by the Water library. Note that
 // no guarantees are made at this point on an unsupported platform.
-func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int) error {
+func (tun *tunAdapter) setup(ifname string, iftapmode bool, addr string, mtu int) error {
 	var config water.Config
 	if iftapmode {
 		config = water.Config{DeviceType: water.TAP}
@@ -27,7 +27,7 @@ func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int)
 
 // We don't know how to set the IPv6 address on an unknown platform, therefore
 // write about it to stdout and don't try to do anything further.
-func (tun *tunDevice) setupAddress(addr string) error {
+func (tun *tunAdapter) setupAddress(addr string) error {
 	tun.core.log.Println("Platform not supported, you must set the address of", tun.iface.Name(), "to", addr)
 	return nil
 }

src/yggdrasil/tun_windows.go

@@ -13,7 +13,7 @@ import (
 // Configures the TAP adapter with the correct IPv6 address and MTU. On Windows
 // we don't make use of a direct operating system API to do this - we instead
 // delegate the hard work to "netsh".
-func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int) error {
+func (tun *tunAdapter) setup(ifname string, iftapmode bool, addr string, mtu int) error {
 	if !iftapmode {
 		tun.core.log.Printf("TUN mode is not supported on this platform, defaulting to TAP")
 	}
@@ -65,7 +65,7 @@ func (tun *tunDevice) setup(ifname string, iftapmode bool, addr string, mtu int)
 }
 
 // Sets the MTU of the TAP adapter.
-func (tun *tunDevice) setupMTU(mtu int) error {
+func (tun *tunAdapter) setupMTU(mtu int) error {
 	// Set MTU
 	cmd := exec.Command("netsh", "interface", "ipv6", "set", "subinterface",
 		fmt.Sprintf("interface=%s", tun.iface.Name()),
@@ -82,7 +82,7 @@ func (tun *tunDevice) setupMTU(mtu int) error {
 }
 
 // Sets the IPv6 address of the TAP adapter.
-func (tun *tunDevice) setupAddress(addr string) error {
+func (tun *tunAdapter) setupAddress(addr string) error {
 	// Set address
 	cmd := exec.Command("netsh", "interface", "ipv6", "add", "address",
 		fmt.Sprintf("interface=%s", tun.iface.Name()),