Arceliar
deb755e3e9
remove peer.linkIn channel and related logic
2018-06-07 00:49:06 -05:00
Arceliar
ecf37cae8a
make the switch react to peer coord changes immediately, and send out updates immediately
2018-06-07 00:16:47 -05:00
Arceliar
85afe187ff
remove peer timeout logic from the switch, so switch peer entrires are only removed when the peer struct is removed
2018-06-06 23:23:16 -05:00
Arceliar
3b783fbf97
move periodic switch maintenance into the router instead of its own goroutine
2018-06-06 23:10:33 -05:00
Arceliar
5dc0cb5544
move wire_encode_locator logic into getBytesForSig, since that's the only place it's used
2018-06-06 23:00:17 -05:00
Arceliar
1e7d34492d
fix signature checks and add some TODO reminder comments
2018-06-06 22:39:22 -05:00
Arceliar
5fb33da3a2
remove old switch anc/hop/res code
2018-06-06 21:18:21 -05:00
Arceliar
6811759fc9
add new switchMsg struct to replace old anc/hop/res approach
2018-06-06 21:11:10 -05:00
Arceliar
690d29435d
adjust link packet logic so they bypass the lifo stack and are delivered first
2018-06-06 17:44:10 -05:00
Arceliar
bbae9ff8e8
Merge pull request #92 from Arceliar/backpressure
...
Use backpressure instead of estimated bandwidth
2018-06-06 16:58:48 -05:00
Arceliar
fad6f6b50e
remove udp.go
2018-06-06 16:57:36 -05:00
Arceliar
da928af361
fix sim and run gofmt
2018-06-06 16:49:23 -05:00
Arceliar
240841eb38
remove unused recursive search packets
2018-06-06 16:46:15 -05:00
Arceliar
1b89892610
remove UDP, to be replaced with a better implementation later
2018-06-06 16:40:35 -05:00
Neil Alexander
6d9d01dae1
Fix IfName='none'
2018-06-02 23:29:06 +01:00
Arceliar
b9ea5350c6
update search.go comments to describe the iterative approach
2018-06-02 16:45:45 -05:00
Arceliar
3e1ac81854
allow searches to start with nodes further from the destination than ourself
2018-06-02 16:39:34 -05:00
Arceliar
45abfafbba
value instead of pointer types for search dest/mask
2018-06-02 16:33:58 -05:00
Arceliar
34939d4b18
update for wire format changes
2018-06-02 16:30:05 -05:00
Neil Alexander
bbdcee1015
Export fields of sessionPing, dhtReq, dhtRes
2018-06-02 22:19:42 +01:00
Neil Alexander
49af65296d
Export fields of wire structs
2018-06-02 21:21:05 +01:00
Arceliar
28e6c738e2
Merge branch 'master' into iterdht
2018-06-02 15:00:24 -05:00
Arceliar
09baad48e3
retry failed iterative searches, possibly becoming parallel if things are just slow, and keep track of / skip nodes that were already visited in the search
2018-06-02 14:57:06 -05:00
Neil Alexander
bc37d4fb76
Improve formatting of dot: dashed grey for unknown nodes, sans-serif text
2018-06-02 14:24:06 +01:00
Arceliar
ed6c9c2a54
deduplicate dht responses when adding them to the search, limit the search toVisit size
2018-06-02 00:29:36 -05:00
Arceliar
10a72444e3
get itersearch to run in the sim
2018-06-02 00:16:47 -05:00
Arceliar
ecf7e490d7
start of iterative dht searches
2018-06-01 23:34:21 -05:00
Neil Alexander
ec80a81ed5
Mark extrapolated nodes with dashed outline
2018-06-01 23:33:02 +01:00
Neil Alexander
e4082f218f
Add text to dot graph explaining how a node is known
2018-06-01 23:23:24 +01:00
Neil Alexander
a2df5107f0
Change colour scheme: green for self, yellow for peer, blue for open session, white for DHT
2018-06-01 14:20:47 +01:00
Arceliar
ca15bbea57
try color coding dot output
2018-05-31 20:28:09 -05:00
Neil Alexander
ccf71af6b7
Move Init from core.go to debug.go as function is only for simulator
2018-05-27 23:37:57 +01:00
Neil Alexander
460a22c063
Clean up some exported constants
2018-05-27 23:31:34 +01:00
Neil Alexander
a9e61d0d37
Add support for building "release" builds that don't contain pprof which are substantially smaller. To build a "debug" build, use "-tags debug" with "go build"
2018-05-27 23:22:50 +01:00
Neil Alexander
35173e2388
Fix starting TUN read/write
2018-05-27 22:35:30 +01:00
Neil Alexander
4c115de633
De-debug
2018-05-27 22:13:37 +01:00
Arceliar
38e7704161
use backpressure instead of estimated bandwidth, sorted by uptime to break ties
2018-05-27 13:37:35 -05:00
Arceliar
02ba9dc97c
fix npe, these don't need to be pointers
2018-05-27 13:22:21 -05:00
Arceliar
7b12493417
panic if tcp startup fails, since otherwise a nil pointer occurs in multicast. make udp do the same thing.
2018-05-27 12:56:33 -05:00
Neil Alexander
a0f547cc1b
Fix being able to enable/disable multicast
2018-05-26 21:50:47 +01:00
Neil Alexander
bc899c395a
Fix accidental truncation of addresses ending in 8 on macOS and BSD
2018-05-26 21:47:54 +01:00
Neil Alexander
5d87601118
Add getMulticastInterfaces and getSelf to yggdrasilctl
2018-05-23 22:13:52 +01:00
Neil Alexander
1fd53bcb7d
Update comments in configuration
2018-05-23 14:02:13 +01:00
Neil Alexander
ce854a76bd
Add -normaliseconf option and temporarily correct old config item names in running config
2018-05-23 12:04:27 +01:00
Neil Alexander
9d9083e373
Update configuration names, fix multicast interface selection
2018-05-23 11:28:20 +01:00
Neil Alexander
6f79184c9b
Move multicasting into yggdrasil package
2018-05-23 11:13:53 +01:00
Neil Alexander
388ae09fca
Rename some config items
2018-05-22 23:43:29 +01:00
Arceliar
b10ae51565
Merge pull request #85 from neilalexander/yggdrasilctl
...
Human-readable formatting in yggdrasilctl
2018-05-21 19:21:00 -05:00
Neil Alexander
04b3e84023
Show your IPv6 address and subnet when starting
2018-05-21 16:15:31 +01:00
Neil Alexander
9567446f50
Offload formatting to yggdrasilctl and keep precision in JSON
2018-05-21 15:21:23 +01:00
Neil Alexander
59688dcab3
Fix formatting of bytes_sent, bytes_recvd, last_seen, uptime
2018-05-21 15:05:01 +01:00
Neil Alexander
ca3e541d3b
Friendly formats for getDHT, getSessions, setTunTap etc
2018-05-21 14:14:57 +01:00
Neil Alexander
201701ae4a
Add some pretty printing to yggdrasilctl, small modifications to JSON formatting in admin socket
2018-05-21 13:54:51 +01:00
Neil Alexander
bd32f5890b
Run gofmt -s -w
2018-05-21 07:28:03 +01:00
Neil Alexander
79131bb959
Minor tweaks
2018-05-20 23:25:07 +01:00
Neil Alexander
aae570de2a
Optional parameters are now square instead of pointed brackets, avoid nils for help
2018-05-20 21:57:05 +01:00
Neil Alexander
c765e0566f
Convert rest of functions, fix setTunTap
2018-05-20 21:54:15 +01:00
Neil Alexander
c75566d5ac
Various fixes and error catching, add setTunTap
2018-05-20 21:44:30 +01:00
Neil Alexander
4ecc7ce860
Add getTunTap to JSON admin socket
2018-05-20 19:42:37 +01:00
Neil Alexander
c3ca5c64b1
Add some more functions to JSON admin socket
2018-05-20 19:23:43 +01:00
Neil Alexander
9713e73969
Fix dot
2018-05-20 17:25:13 +01:00
Neil Alexander
a6ef7166ea
Start JSON-ifying the admin socket
2018-05-20 17:21:14 +01:00
Arceliar
5c0636eb3d
add uptime and bytes sent/recvd to peer struct and getPeers
2018-05-18 20:41:02 -05:00
Neil Alexander
ca96bbf014
Accept exchanging an MTU of 0 to signify that TUN/TAP is disabled, don't send traffic to a node in that case
2018-05-18 18:56:33 +01:00
Neil Alexander
ec371af84f
Track TX/RX bytes over session and if MTU was adjusted, add to admin socket getSession
2018-05-18 17:59:29 +01:00
Arceliar
ec8fe338d5
more insertIfNew bugfixes, and add peerOnly to getDHT output (true if a node is in the bucket.peers slice instead of bucket.others--it means they're not regularly pinged, they're only there to make sure DHT lookups include them as a result, for bootstrapping reasons)
2018-05-17 21:43:26 -05:00
Arceliar
fe518f4e3f
bugfixes related to peer timeouts in the DHT, significantly improve DHT bootstrap speed
2018-05-17 21:20:31 -05:00
Arceliar
8d9887294c
add dht time since last ping to admin socket, some DHT code cleanup, bugfix to insertIfNew
2018-05-17 19:32:29 -05:00
Arceliar
d98640fd59
switch cleanup
2018-05-16 17:48:53 -05:00
Arceliar
6b51b44cbf
slightly better variable naming
2018-05-16 17:36:37 -05:00
Arceliar
800ccaa3d4
cleanup
2018-05-16 17:32:26 -05:00
Arceliar
fe712d24f8
don't allow buckets to overflow when the next bucket isn't full
2018-05-16 17:24:38 -05:00
Arceliar
8228242eed
misc dht and tree changes to stabilize coords and bootstrap the dht faster
2018-05-15 23:57:00 -05:00
Arceliar
96c55da987
Merge pull request #76 from neilalexander/hjson
...
Use HJSON for config instead of JSON
2018-05-13 15:09:28 -05:00
Neil Alexander
5299783e35
Add getTunTap to admin socket
2018-05-10 09:48:12 +01:00
Neil Alexander
e381808704
Add ability to select interface by friendly name on Windows
2018-05-09 16:42:24 +01:00
Neil Alexander
8ea3070a02
Small tweaks/clean up
2018-05-09 14:03:28 +01:00
Neil Alexander
45b106168e
Use HJSON instead of JSON
2018-05-09 13:54:31 +01:00
Arceliar
5dac273a3d
rename to 'AllowedBoxPubs' and similar
2018-05-07 17:05:54 -05:00
Arceliar
6ce16d8192
debug admin socket
2018-05-06 19:48:26 -05:00
Arceliar
94dd231e13
add (not working) admin functions for auth keys, needs debugging
2018-05-06 19:31:19 -05:00
Arceliar
0b391b6e3a
debugging and cleanup
2018-05-06 19:01:52 -05:00
Arceliar
80f893aac3
let the peer's linkLoop call close if the peer receives no announcements for too long
2018-05-06 17:17:12 -05:00
Arceliar
6026e0a014
Optional peer authentication, if non-empty then incoming TCP and all UDP peers must match one of these box keys
2018-05-06 16:32:34 -05:00
Arceliar
3a1b67da8c
Update admin.go
2018-05-05 20:20:38 -05:00
Arceliar
cdedd304af
make removePeers work for TCP connections and minor admin cleanup
2018-05-05 17:14:03 -05:00
Arceliar
8b9a91be57
possibly fix weird issue I was having with netns, still not sure I understand why it was a problem
2018-04-28 16:39:58 -05:00
Neil Alexander
bdf9e45082
Default to previous scheme when url.Parse returns an error
...
In response to:
```
panic: parse x.x.x.x:xxx: first path segment in URL cannot contain colon
goroutine 33 [running]:
yggdrasil.(*Core).DEBUG_addPeer(0x8e58000, 0x8e34080, 0x12)
/go/src/github.com/{{ORG_NAME}}/{{REPO_NAME}}/src/yggdrasil/debug.go:317 +0x420
main.(*node).init.func1(0x8e48000, 0x8e58000)
/go/src/github.com/{{ORG_NAME}}/{{REPO_NAME}}/yggdrasil.go:75 +0x70
created by main.(*node).init
/go/src/github.com/{{ORG_NAME}}/{{REPO_NAME}}/yggdrasil.go:69 +0x410
```
2018-04-27 09:53:31 +01:00
Jeff Becker
fe13fea1e5
remove hard coded tor config options
2018-04-26 10:26:10 -04:00
Jeff Becker
7756891510
support socks proxy in peer url and decouple explicit tor/i2p routing
2018-04-26 10:23:21 -04:00
Jeff Becker
769b058004
more docs
2018-04-25 10:11:11 -04:00
Jeff Becker
1be8bbed1c
more docs
2018-04-25 10:09:09 -04:00
Jeff Becker
de69860e9b
* only enable tor proxy dialer when tor is enabled
...
* add docstrings
2018-04-25 10:06:13 -04:00
Jeff Becker
c16e354a44
Merge remote-tracking branch 'origin/master' into tor-auto
2018-04-25 10:01:10 -04:00
Arceliar
8ef2e55de6
try sending pings before sending searches for an unresponsive session
2018-04-22 15:31:30 -05:00
Jeff Becker
5e23185ddc
use address only not port
2018-04-20 08:41:09 -04:00
Jeff Becker
3c4fee0492
tor auto config
2018-04-19 10:30:40 -04:00
Neil Alexander
48ced483d6
Merge pull request #64 from Arceliar/dht
...
Limit DHT pings to 1/min per node
2018-03-17 20:46:47 +00:00
Arceliar
fe5ef4e867
don't add things to the dht rumorMill if they've been pinged in the last minute (arbitrary time, needs investigating)
2018-03-17 15:28:22 -05:00
Arceliar
0459f88b92
add a udp close packet, and partial support for a removePeer admin call (sends close to UDP peers, but doesn't close TCP connections yet)
2018-03-16 18:24:28 -05:00
Neil Alexander
bf0413a0c4
Modify ICMPv6 source address for "Packet Too Big" messages to a routable address so that it correctly routes to nodes in an yggdrasil /64 subnet
2018-03-10 22:31:36 +00:00
Arceliar
b34345229a
remove any peers from the dht if a reset is triggered (from coord changes)
2018-03-10 15:16:39 -06:00
Arceliar
9ce0b7fbea
keep peers separate from other nodes in dht
2018-03-10 13:58:48 -06:00
Neil Alexander
1155816df8
Show both UDP and TCP listen addresses in stdout ( #51 )
2018-03-07 09:41:04 +00:00
Neil Alexander
166d25619d
Attempt to support NetBSD
...
This code actually consolidates a lot of the BSD code together, and even setting the interface MTU with SIOCSIFMTU seems to work fine.
What doesn't work though is setting the interface address using SIOCSIFADDR_IN6, which I attempted to plagiarise from the Darwin code.
As a fallback, ifconfig is used, which solves the problem enough to get it working.
2018-03-04 23:47:01 +00:00
Arceliar
cd0d1a1d26
get the fd instead of depending on water to do it
2018-03-04 13:57:34 -06:00
Arceliar
039c4a5a35
only try to build on openbsd and freebsd for now, darwin needs work too
2018-03-04 11:02:54 -06:00
Arceliar
478b80a07a
cleanup
2018-03-04 10:56:46 -06:00
Arceliar
e7726cfb00
deduplicate some bsd tuntap code, still untested
2018-03-04 10:55:32 -06:00
Neil Alexander
c30792245a
Add FreeBSD support in TAP mode
2018-03-04 16:24:50 +00:00
Neil Alexander
a92e6c2588
Merge pull request #29 from Arceliar/netlink
...
Linux: use netlink instead of ip
2018-03-04 10:47:34 +00:00
Arceliar
5ec6265a70
use netlink instead of ip commands to set address/mtu and bring up the tuntap device on linux
2018-03-03 16:41:36 -06:00
Arceliar
0460fdd301
panic if tun.write or tun.read returns an error and was launched from debug.go, since there's no way to recover in these scenarios
2018-03-03 13:56:26 -06:00
Arceliar
a367f2ca17
gofmt
2018-03-03 11:49:24 -06:00
Arceliar
0578a9f273
manual merge
2018-03-03 11:07:08 -06:00
Neil Alexander
4e5627f933
Update default interface MTU to use per-platform instead of global value
2018-03-03 12:43:39 +00:00
Neil Alexander
4917ea3dd2
Per-platform TUN defaults
2018-03-03 12:30:54 +00:00
Neil Alexander
bec898a326
Don't allow exceeding maximum MTU for a given platform
2018-03-03 11:47:14 +00:00
Neil Alexander
7c0102e43d
Be a little bit less verbose on OpenBSD
2018-03-01 15:31:49 +00:00
Neil Alexander
6640b33334
Fix using 'auto' as device name on OpenBSD - default to /dev/tap0
2018-03-01 15:19:20 +00:00
Neil Alexander
24be3f1d67
Turns out FreeBSD is a bit different so restrict this to OpenBSD for now
2018-03-01 15:11:12 +00:00
Neil Alexander
90393ae03b
Set interface flags properly on OpenBSD
2018-03-01 15:02:53 +00:00
Neil Alexander
9e4d169208
Set interface IP and MTU on BSD
2018-03-01 13:37:05 +00:00
Neil Alexander
f8dda26dba
Add BSD support (openbsd, freebsd, solaris)
2018-03-01 11:49:49 +00:00
Neil Alexander
ebc4eacee4
Allow sane defaults on setTunTap
2018-02-28 15:27:58 +00:00
Neil Alexander
fdd32b9571
Add setTunTap
2018-02-28 15:15:57 +00:00
Neil Alexander
2b48fd1fce
Add addPeer to admin socket
2018-02-28 13:43:06 +00:00
Arceliar
ddc4773b19
don't drop send/recv traffic going through the crypto workers, just block until they're free (TODO run further tests to make sure this doesn't cycle/deadlock)
2018-02-26 18:12:28 -06:00
Arceliar
63b55cda62
Mostly working PMTU discovery when going over UDP links
2018-02-25 20:24:36 -06:00
Arceliar
0470f6f1c1
cleanup
2018-02-23 13:04:52 -06:00
Arceliar
bb3ae8b39b
temporarily limit PMTU to 2048, as a workaround to some pathelogical behavior where a TCP stream carried over a UDP peer can throttle down to 0 in the presence of significant packet loss
2018-02-23 12:46:22 -06:00
Arceliar
d3dc7765f2
trying to debug UDP+large MTU issues
2018-02-20 17:31:12 -06:00
Arceliar
a81c361484
tcp reconnect bufix, test with bufio, and switch back to tcp auto-peering by default to continue testing
2018-02-19 23:22:36 -06:00
Arceliar
a21a039b57
remove unused field from peer
2018-02-19 19:47:11 -06:00
Arceliar
4045597516
Use larger UDP chunks for link-local IP and let the OS fragment it. Switch to UDP for link-local peers. Minor code cleanup for TCP.
2018-02-19 19:34:51 -06:00
Arceliar
71150fcb86
ignore root tstamp updates if we just updated, to throttle the rate at which updates (and new signatures) can propagate
2018-02-17 23:57:24 -06:00
Arceliar
a66a29779a
Slightly nicer way to throttle peer announcements
2018-02-17 23:41:42 -06:00
Arceliar
0fc7401635
check root before adding peers to the switch lookupTable, instead of during each lookup
2018-02-17 23:14:23 -06:00
Arceliar
430d49d8a4
send fewer link announcements, fix a ttl encoding bug, and remove unnecessary key field from the wire format for dht req/res
2018-02-17 21:59:08 -06:00
Arceliar
8ba11b86bb
remove duplicate tcp connections
2018-02-17 20:44:23 -06:00
Arceliar
25f00c1c7a
disable keys in link protocol traffic, since these are already known, *breaks backwards compat*
2018-02-17 20:30:59 -06:00
Arceliar
da44ec282f
Add a rumor mill to throttle dht maintenance traffic
2018-02-17 17:10:08 -06:00
Neil Alexander
02473158d4
Allow setting IfName to 'none' to run without TUN/TAP
2018-02-15 22:29:13 +00:00
Neil Alexander
366d2af1d3
Fix first queued packet on session pcreation
2018-02-15 18:02:08 +00:00
Neil Alexander
1c59338f01
Fix checksums and packet buffers, sends ICMPv6 Packet Too Big messages successfully now
2018-02-15 13:38:54 +00:00
Neil Alexander
37e4492b86
Send ICMPv6 response to packets larger than session MTU (WIP: checksum wrong?)
2018-02-14 22:59:24 +00:00
Arceliar
a3a9696880
Merge pull request #14 from neilalexander/icmpv6
...
Replace ndp.go with icmpv6.go
2018-02-14 11:16:24 -06:00
Neil Alexander
844212e95b
Highlight packets that exceed the agreed session MTU
2018-02-14 14:08:40 +00:00
Neil Alexander
34b264067e
Run gofmt -s -w .
2018-02-14 11:46:10 +00:00
Neil Alexander
0bf43b758f
Split create_icmpv6 into create_icmpv6_tun and create_icmpv6_tap
2018-02-14 11:39:55 +00:00
Neil Alexander
d78e0f7067
Improve icmpv6.go
...
- Now doesn't use unsafe
- Much cleaner
- Doesn't run in a goroutine perpetually
- Has a function to create ICMPv6 packets
2018-02-14 11:23:46 +00:00
Neil Alexander
6571a8c300
Don't use channels for ICMPv6 packets
2018-02-12 20:00:55 +00:00
Neil Alexander
fac4bf796e
Add some error handling and other fixes to icmpv6.go
2018-02-12 19:40:13 +00:00
Neil Alexander
be0d6feeba
Remove ndp.go and add icmpv6.go
2018-02-12 18:19:31 +00:00
Neil Alexander
7a0b48ffb3
Clean up session.go
2018-02-12 00:01:15 +00:00
Neil Alexander
11a7c5c458
Exchange MTU on wire
2018-02-11 23:58:30 +00:00
Neil Alexander
536974f20c
Try to exchange MTUs when creating sessions
2018-02-11 23:09:05 +00:00
Neil Alexander
e9bd98d213
Add "IfTAPMode" configuration option to allow selecting TAP mode on supported platforms
2018-02-11 21:45:44 +00:00
Arceliar
d424489329
add tcp support and use it by default
2018-02-09 17:42:55 -06:00
Arceliar
4acce71468
Merge branch 'master' into bigmtu
2018-02-07 17:49:04 -06:00
Arceliar
e9adf327b0
possibly fix deadlock from race in peer linkloop goroutine, add some related debug code to the admin
2018-02-07 17:48:30 -06:00
Arceliar
b704d7b497
change mtu and enable udp chunking
2018-02-04 11:25:20 -06:00
Arceliar
63aadf6e88
use smaller buffer sizes for buffered channels
2018-02-03 18:44:28 -06:00
Arceliar
2dd8152a0c
reorganize and add more to the admin
2018-01-29 18:48:14 -06:00
Arceliar
c18d863a3e
update comments, mostly TODO/FIXME notes
2018-01-26 17:30:51 -06:00
Neil Alexander
e44f64bea0
Fix MTU issues with TAP adapters
2018-01-25 17:44:56 +00:00
Arceliar
d52fab8af6
disable/enable the tap device at startup to clear any old settings, e.g. old addresses
2018-01-24 21:14:26 -06:00
Arceliar
06e3c8c997
if you could go ahead and include your port number in your multicast announcements, that'd be great
2018-01-24 18:45:29 -06:00
Neil Alexander
761e7cdeb0
Remove apparently excessive escaping from netsh in tun_windows.go
2018-01-24 22:37:08 +00:00
Neil Alexander
ff55070458
TAP support added
...
- Supports Windows using OpenVPN NDIS 6 TAP driver
- Supports NDP Neighbor Solicitation and Advertisements in ndp.go
- Supports TAP encapsulation and decapsulation in tun.go
2018-01-24 10:59:01 +00:00
Arceliar
2b7c6eafcd
In admin dot, reverse direction of peer links, include the switch port for each link, and sort the output by coords
2018-01-21 16:19:39 -06:00
Neil Alexander
36f9cc5041
Highlight own node on dot graph
2018-01-21 21:54:50 +00:00
Arceliar
87a4af7841
update admin dot to better handle missing nodes and to direct links towards parent, based on neilalexander's work
2018-01-21 14:58:54 -06:00
Arceliar
625b97c511
add and use a thread-safe way of reading router internal state, and include active sessions in the admin query
2018-01-21 12:55:45 -06:00
Neil Alexander
8ef852469b
Formatting
2018-01-21 17:53:25 +00:00
Neil Alexander
483d90a728
Draw dot draphs (although maybe not very well)
2018-01-21 17:51:51 +00:00
Neil Alexander
c4ac0a90ac
Add the ability to see switch ports and DHT
2018-01-21 12:57:54 +00:00
Neil Alexander
b754d68068
Add an admin socket
2018-01-21 00:17:15 +00:00
Arceliar
502ab3cfaa
check that the source IP inside a packet matches the address or prefix for the session that transmitted it
2018-01-19 17:33:04 -06:00
Arceliar
f929df1ea9
minor performance adjustments
2018-01-18 18:48:34 -06:00
Neil Alexander
62c45e7cc7
Use MTU from interface definition
2018-01-15 14:39:07 +00:00
Neil Alexander
d7be706413
Move to unix.Syscall etc and tidy up
2018-01-15 14:35:37 +00:00
Neil Alexander
5d2dd061f0
Fix definition of SIOCAIFADDR_IN6
2018-01-15 14:14:18 +00:00
Neil Alexander
8e86c4b853
Merge /Users/neilalexander/Desktop/Projects/yggdrasil-go into macos-interface
2018-01-15 11:22:54 +00:00
Arceliar
75965b6da4
Switch connAddr (udp map key) from string to a struct that allocates less. Reduce some other allocations. Use larger channel buffers to reduce backpressure from runtime jitter.
2018-01-13 07:26:26 -06:00
Arceliar
ef1e0c902f
Add regexp to limit which link-local IPv6 zones allow peering, and check that a peer isn't from within the networks address block (prevents accidental tunneling)
2018-01-09 02:08:54 -06:00
Neil Alexander
d69190715f
Added a darwin tun module. It should work, but it doesn't!
2018-01-06 16:39:30 +00:00
Neil Alexander
c3600d14d6
Implement a tun interface to reduce dependency on Water library
2018-01-05 23:35:59 +00:00
Neil Alexander
b3ebe76b59
Run gofmt -s -w .
2018-01-04 22:37:51 +00:00
Neil Alexander
ae7b07ae6a
Move Linux-specific ifname logic to tun_linux.go and place a generic in tun_other.go
2018-01-04 22:34:17 +00:00
Neil Alexander
1c799b305d
Add support for specifying tun device name
2018-01-04 13:31:48 +00:00
Arceliar
e5d526881d
Disable tun panic on IPv4 packets and add a link to a Vyatta router config
2018-01-03 15:27:13 -06:00
Arceliar
82fd435211
Avoid sending unnecessairy udp key packets, and try config peers less often
2018-01-02 18:45:09 -06:00
Arceliar
d7e6d814a0
first code/readme/license commit
2017-12-28 22:16:20 -06:00
