Neil Alexander
b5ac65cacb
Rearrange public interface, godoc improvements
2019-03-29 18:05:17 +00:00
Neil Alexander
399e1a2ffe
Make AddPeer remember added peer (as opposed to CallPeer which does not)
2019-03-29 08:58:30 +00:00
Neil Alexander
a830521078
Don't crash if Yggdrasil is started with no router adapter
2019-03-29 08:38:09 +00:00
Neil Alexander
dd05a7f2a8
Tweaks
2019-03-28 19:09:19 +00:00
Neil Alexander
fd0b614f9c
Temporarily disable debug CircleCI builds as I don't know how badly I've broken the sim with this PR
2019-03-28 18:03:14 +00:00
Neil Alexander
7ea4e9575e
Break out multicast into a separate package
2019-03-28 16:13:14 +00:00
Neil Alexander
03bc7bbcd6
Fix TUN/TAP for non-Darwin platforms
2019-03-28 15:32:01 +00:00
Neil Alexander
eb22ed44ac
Add new reject channel to router so we can send back rejected packets to adapter (e.g. for ICMPv6 Packet Too Big), implement ICMPv6 PTB in TUN/TAP instead of router
2019-03-28 09:50:13 +00:00
Neil Alexander
0715e829c2
Fix adapter setup and no longer panics on packets shorter than IP header
2019-03-28 09:12:00 +00:00
Neil Alexander
0b494a8255
Refactoring: move tuntap and icmpv6 into separate package
2019-03-28 00:30:25 +00:00
Neil Alexander
5bacfabae7
Handle cases where link-local addresses may disappear or change
2019-03-13 17:43:33 +00:00
Neil Alexander
41872820c3
Remove isAutoconf option to GenerateConfig
2019-03-12 19:18:43 +00:00
Neil Alexander
4062c93e18
Re-order config, update default Listen
2019-03-12 19:04:30 +00:00
Neil Alexander
830be7f4db
Update comments again
2019-03-12 16:06:12 +00:00
Neil Alexander
dc3a05f13a
Correctly classify link-local addresses in the TCP handler, fix AllowedPublicEncryptionKeys warning
2019-03-12 16:03:02 +00:00
Neil Alexander
c388885a92
Update config comments for AllowedEncryptionPublicKeys
2019-03-12 15:29:42 +00:00
Neil Alexander
229de91a3a
Fix AllowedEncryptionPublicKeys so that it works in incoming connections and not outgoing ones
2019-03-12 15:01:27 +00:00
Neil Alexander
ec19c479dd
Add comment about no reloading for LinkLocalTCPPort
2019-03-10 19:17:03 +00:00
Neil Alexander
9d5ca85424
Add LinkLocalTCPPort option
2019-03-10 19:08:56 +00:00
Neil Alexander
3c2cdfea1c
Keep AWDL awake, or wake it up again after a minute if suspended for some reason (e.g. sleep)
2019-03-10 18:05:27 +00:00
Arceliar
3c696c3e55
use idle time in switch decisions to force it to try all links
2019-03-09 19:27:52 -06:00
Arceliar
c7b4bfcef5
misc fixes
2019-03-09 18:08:26 -06:00
Neil Alexander
03eec4b14d
Don't leak interface name via multicast, ensure zone is always correct when dialling link-local
2019-03-09 09:24:52 +00:00
Arceliar
a0e6edd219
Merge pull request #360 from neilalexander/multilink
...
Support for multiple listeners
2019-03-08 18:56:47 -06:00
Arceliar
426d157025
make sure we don't replace an existing listener
2019-03-08 18:51:07 -06:00
Neil Alexander
917ca6c1c5
Make changes based on review comments
2019-03-08 10:26:46 +00:00
Arceliar
02b1892cc5
try to switch parents if a parent link is blocked
2019-03-07 21:36:12 -06:00
Neil Alexander
57eb6eaeb0
Clean up config package
2019-03-06 17:45:47 +00:00
Neil Alexander
b8cabf3212
Support removing Listen interfaces at runtime properly
2019-03-06 16:40:48 +00:00
Neil Alexander
18ef28a477
Fix default Listen config
2019-03-06 13:00:45 +00:00
Neil Alexander
531d9f39ca
Fix multicast bug, set static multicast interval 15 seconds
2019-03-06 12:15:40 +00:00
Neil Alexander
c0d5a8c0bd
Clean up old listeners first
2019-03-06 12:09:57 +00:00
Neil Alexander
f4e17b9a9f
Properly handle multicast interfaces going up and down
2019-03-06 12:07:33 +00:00
Neil Alexander
de2aff2758
Refactor multicast so that it creates a new TCP listener for each interface with LL addresses (so that it will not break if Listen is not set with a wildcard address)
2019-03-06 11:06:13 +00:00
Neil Alexander
19267beb9e
Merge branch 'develop' into multilink
2019-03-05 22:07:20 +00:00
Neil Alexander
236692bdc4
Add getTunnelRouting and setTunnelRouting ( fixes #362 )
2019-03-05 17:55:46 +00:00
Neil Alexander
a17d6d3a68
Fix getTunTap ( fixes #363 )
2019-03-05 17:37:26 +00:00
Neil Alexander
2ef823e69c
Fix deadlock when reconfiguring multicast
2019-03-04 23:16:46 +00:00
Neil Alexander
88925d3e06
Centralise call/listen functions in link.go
2019-03-04 22:45:35 +00:00
Neil Alexander
61774aed3b
Show proto in admin socket, link linkInfo from peer, other fixes
2019-03-04 20:33:08 +00:00
Neil Alexander
2b8648e2b3
Fix debug builds
2019-03-04 19:04:09 +00:00
Neil Alexander
0be0b078cb
Remove unused types in link.go
2019-03-04 19:00:06 +00:00
Neil Alexander
eeede4e6d0
Fix some obvious concurrency bugs
2019-03-04 18:47:40 +00:00
Neil Alexander
82bb95b77f
Some more (inelegant) multiple listener code plus some reconfigure support
2019-03-04 18:41:32 +00:00
Neil Alexander
be8db0c120
Support multiple TCP listeners
2019-03-04 17:52:57 +00:00
Neil Alexander
ae79246a66
Move TCP under link.go
2019-03-04 17:09:48 +00:00
Neil Alexander
918ce5a3fc
Add a timeout on the UNIX admin socket check
2019-03-03 19:32:36 +00:00
Neil Alexander
c940bae9e3
Update output
2019-03-03 14:15:01 +00:00
Neil Alexander
8f66d5b8dd
Try to clean up UNIX admin socket
2019-03-03 14:09:54 +00:00
Neil Alexander
3c733eadb4
Merge pull request #350 from neilalexander/awdl
...
Wake AWDL for multicast peering on macOS
2019-03-02 10:33:47 +00:00
Neil Alexander
12e088ab9e
Remove unnecessary Cgo line
2019-03-01 19:34:53 +00:00
Neil Alexander
e99903bf72
Wake up AWDL on Darwin if awdl0 is an enabled multicast interface
2019-03-01 19:26:50 +00:00
Neil Alexander
a6ae159329
Give some more feedback that a configuration reload actually happens
2019-03-01 18:26:52 +00:00
Arceliar
304f22dc1d
re-enable session workers in a way that doesn't block and drops packets before decrypting if necessary
2019-02-28 20:05:21 -06:00
Arceliar
06df791efc
buffer packets moving from the switch to the router, allow them front drop if there's too many
2019-02-28 19:08:56 -06:00
Arceliar
371b5ca6a2
Change log message about AllowedEncryptionPublicKeys from Debug to Warn
2019-02-28 18:49:34 -06:00
Arceliar
2569242050
fixes to linkInterface.handler()
2019-02-26 21:07:56 -06:00
Arceliar
def4fb3587
fix timeout and improve logging on connection close
2019-02-24 14:48:16 -06:00
Arceliar
654407dc6d
close long-dead connections in link.go instead of in switch.go, this is important in case a connection opens but never bothers to send even one switch message
2019-02-24 13:24:55 -06:00
Arceliar
bb3edd5e55
add the relevant error to the default logging when a connection is closed
2019-02-24 12:59:30 -06:00
Arceliar
042adb0516
make sure the only place traffic is ever dropped is in the switch. this currently disables the dedicated crypto workers
2019-02-23 00:07:00 -06:00
Arceliar
e31962de0f
Merge branch 'develop' into switch
2019-02-16 16:26:20 -06:00
Arceliar
6f0bbbfb98
Debug some issues with the state machine that tracks idle connections in link.go
2019-02-15 19:35:10 -06:00
Arceliar
3c9c8672c9
Merge branch 'develop' of https://github.com/yggdrasil-network/yggdrasil-go into switch
2019-02-15 16:28:48 -06:00
Neil Alexander
0ca64b0abe
Remove ReadTimeout configuration option
2019-02-10 12:13:49 +00:00
Arceliar
21cecf4630
consistently prioritize which peer to forward to instead of letting it be partly random
2019-02-09 17:44:25 -06:00
Arceliar
ad43558fbb
fix bug in switch time
2019-02-09 15:30:17 -06:00
Arceliar
74ac535d55
slightly faster switch logic, should be easier to have a useful tie-breaker for peers that are equally close to the destination via the tree metric
2019-02-08 19:46:11 -06:00
Arceliar
41f49faaa0
get code running in the netns test again, remove unnecessary allocations that were found in profiling
2019-02-05 17:39:59 -06:00
Arceliar
2f8dd5dde0
remove race condition in setting peer.close by requiring it as an argument to newPeer
2019-02-03 15:50:25 -06:00
Arceliar
5ddf84f329
remove peers completely after a long switch timeout, this could use some improvement later
2019-02-03 15:22:14 -06:00
Arceliar
ebbe5f67ad
don't time out a link unless we were expecting an ack and didn't get one
2019-02-02 22:41:51 -06:00
Arceliar
b44a0f29f3
send an ack if we receive a packet and don't have any return traffic, keeping a legacy 4-second keep-alive in case there's no traffic at all to send (to be removed later, after nodes have upgraded), ideally we should either remove ReadTimeout or use it for the switch idle timeout instead
2019-02-02 22:18:55 -06:00
Neil Alexander
43f798e82e
Check link-local in tcp.go, track direction in link.go, fix compile error for mobile.go
2019-02-01 00:02:17 +00:00
Neil Alexander
ec5f7d9879
Enforce AllowedEncryptionPublicKeys for all peers inc. link-local
2019-01-31 23:47:20 +00:00
Neil Alexander
432f93de89
Check AllowedEncryptionPublicKeys
2019-01-31 23:29:18 +00:00
Neil Alexander
e36f88c75f
Info logging when link connects/disconnects
2019-01-31 23:18:02 +00:00
Arceliar
05962b2cbd
disable idle nodes in the switch instead of killing the connection entirely. this implementation is ugly, but i think it maybe works
2019-01-30 20:58:23 -06:00
Neil Alexander
2466c54a71
Update debug lines in link.go
2019-01-27 20:56:10 +00:00
Neil Alexander
1a3a67f205
Merge remote-tracking branch 'origin/develop' into link
...
Fix merge conflicts from flexible logging branch
2019-01-27 20:54:21 +00:00
Neil Alexander
22d2e0e4fe
Fix debug builds
2019-01-27 13:33:32 +00:00
Neil Alexander
0838928668
Add support for flexible logging levels
2019-01-27 13:31:43 +00:00
Arceliar
6ef0e47632
fix merge conflict
2019-01-26 14:27:37 -06:00
Arceliar
bca69df1f6
possible workaround to a deadlock
2019-01-26 14:07:18 -06:00
Neil Alexander
705b914d00
Move awdl into link
2019-01-23 19:42:33 +00:00
Neil Alexander
188a9e439d
Bug fixes for AWDL
2019-01-23 18:16:31 +00:00
Neil Alexander
2944be4faf
Further tweaks
2019-01-23 17:05:16 +00:00
Neil Alexander
81545fd9bf
Clean up
2019-01-23 15:16:22 +00:00
Neil Alexander
9c6cf50684
Adapt AWDL to link
2019-01-23 15:08:19 +00:00
Arceliar
7b2460662d
close the connection before blocking a duplicate link
2019-01-22 21:53:39 -06:00
Arceliar
f936151f2d
correctly clean up various things
2019-01-22 21:48:43 -06:00
Arceliar
eb8951081d
fix duplicate connection bug, I think this is also in develop
2019-01-22 21:23:57 -06:00
Arceliar
12c0e019dc
only create one interface, but still opens duplicate connections before it catches this, so more work is needed
2019-01-22 21:16:41 -06:00
Arceliar
f95663e923
actually finish initializing peers
2019-01-22 18:24:15 -06:00
Arceliar
137212d8cf
work in progress, establishes TCP connections and gets through metadata handshake using the link code, but doesn't seem to send traffic yet (no switch peers are created)
2019-01-21 23:08:50 -06:00
Arceliar
5a4d6481dd
Work in progress, add a linkInterfaceMsgIO interface type and make stream implement it, this will be used by link
2019-01-21 21:27:52 -06:00
Neil Alexander
ad6ec6ab11
Merge pull request #315 from neilalexander/flowlabel
...
Update switch flow separation for IPv4
2019-01-21 23:22:40 +00:00
Neil Alexander
62d4d62a77
Update comments
2019-01-21 16:24:29 +00:00
Neil Alexander
d3f67ad017
Improve command flow
2019-01-21 16:22:49 +00:00
Neil Alexander
cdfb930703
Update switch flow separation for IPv4
2019-01-21 12:27:29 +00:00
Arceliar
c8e1be0f73
link/stream refactoring bugfixes and gofmt
2019-01-19 16:37:45 -06:00
Neil Alexander
41a410f2a1
Initialise awdl.go from link.go, remove deadlock between awdl.create and link.create, other bits and pieces
2019-01-19 12:19:24 +00:00
Neil Alexander
c51a3340b1
Update awdl.go to use new link stuff (untested)
2019-01-19 00:42:53 +00:00
Neil Alexander
4ae36dfffe
Merge branch 'ios' into link
2019-01-19 00:23:38 +00:00
Neil Alexander
6fe3b01e90
Rename awdl.go to link.go, add stream.go, update tcp.go
2019-01-19 00:14:10 +00:00
Neil Alexander
30df632eb2
Merge branch 'develop' into ios
2019-01-17 23:15:00 +00:00
Neil Alexander
c839012580
Fix source address selection
2019-01-17 23:06:59 +00:00
Neil Alexander
9d5085492e
Handle session firewall using central config
2019-01-16 20:38:51 +00:00
Neil Alexander
fdf300a1ff
Handle AllowedEncryptionPublicKeys internally
2019-01-16 20:26:39 +00:00
Neil Alexander
68eb684f6d
Fix mobile.go now that multicast interfaces are handled internally
2019-01-16 19:27:44 +00:00
Neil Alexander
8baf593b62
Update source address selection when sintf specified
2019-01-16 14:52:27 +00:00
Neil Alexander
c85dbaea95
Fix missing nodeinfo.init
2019-01-16 13:23:26 +00:00
Neil Alexander
4fba558638
Fix concurrent map write in tcp.go
2019-01-16 13:20:12 +00:00
Neil Alexander
53be1b02f3
Check if accepting socket produced an error
2019-01-15 08:53:57 +00:00
Neil Alexander
2cd373fc1e
Remove unnecessary selects
2019-01-15 08:51:19 +00:00
Neil Alexander
39567bed83
Address some comments
2019-01-15 08:44:33 +00:00
Neil Alexander
3bf53796a7
Merge branch 'develop' into nodeconfig
2019-01-15 08:37:10 +00:00
Arceliar
248edf8319
Merge pull request #304 from deavmi/develop
...
Spelling fixes
2019-01-14 21:27:15 -06:00
Neil Alexander
d9ddf30faf
Fix debug builds
2019-01-14 19:29:22 +00:00
Neil Alexander
f6b663c257
Make multicasting use config instead of ifceExpr in Core
2019-01-14 19:27:13 +00:00
Neil Alexander
9e486ed4fe
Move nodeinfo into router
2019-01-14 19:05:16 +00:00
Neil Alexander
5cde3b5efc
Update nodeinfo in router reconfigure
2019-01-14 18:51:49 +00:00
Neil Alexander
9e186bdd67
Remove mutexes from CKR and use router goroutine/doAdmin for update config
2019-01-14 18:34:15 +00:00
Neil Alexander
51026d762e
Make session firewall thread-safe for config updates
2019-01-14 18:24:35 +00:00
Neil Alexander
bd04124e43
Reconfigure support for crypto-key routing
2019-01-14 18:06:41 +00:00
Neil Alexander
28072c9fe2
Make CKR thread-safe
2019-01-14 17:41:08 +00:00
Neil Alexander
87d393bd9f
Move add peer loop into Core, refresh it from active config
2019-01-14 17:21:15 +00:00
Neil Alexander
aed3c7e784
Give nodeconfig to tun
2019-01-14 14:25:52 +00:00
Neil Alexander
738a9da796
Merge branch 'develop' into nodeconfig
2019-01-14 14:01:38 +00:00
Neil Alexander
f556f3e2a8
Try to perform TCP-like key exchange
2019-01-13 22:57:37 +00:00
Neil Alexander
704e4a062f
Specify source interface when responding to multicast beacon
2019-01-13 22:51:34 +00:00
Neil Alexander
c8db66b17d
Remove unneeded AWDL context functions
2019-01-13 18:11:36 +00:00
Neil Alexander
4622a85c34
AWDL support for macOS/iOS
2019-01-13 18:08:41 +00:00
Neil Alexander
e24e859254
Add some comments, move AWDL functions to iOS-specific build tags
2019-01-10 11:31:04 +00:00
Neil Alexander
a371e34a18
Add Android support, add addStaticPeers
2019-01-10 10:44:44 +00:00
Tristan B. Kildaire
08a71af2d8
Spelling fixes for switch.go
2019-01-09 11:49:12 +02:00
Tristan B. Kildaire
345979b502
Spelling fixes for search.go
2019-01-09 11:44:45 +02:00
Tristan B. Kildaire
ab4be3424b
Spelling fixes for peer.go
2019-01-09 11:42:07 +02:00
Neil Alexander
6efac9a377
Add contexts
2019-01-06 14:12:10 +00:00
Neil Alexander
2034c9eab9
Fix missing pointer from awdlInterface to awdl
2019-01-05 23:00:49 +00:00
Neil Alexander
87362a21e2
Access NSLog through Cgo for iOS NetworkExtension logging
2019-01-05 21:59:07 +00:00
Neil Alexander
6bbd8c1b30
Rethink channels, more error throwing
2019-01-05 12:06:45 +00:00
Neil Alexander
90366dd853
Update handler behavior
2019-01-05 01:02:22 +00:00
Neil Alexander
1170ea9e98
Start linkloop
2019-01-05 00:52:41 +00:00
Neil Alexander
4363283a6f
Notify switch idle
2019-01-05 00:32:28 +00:00
Neil Alexander
00bf71a09a
Fight me Swift and your hexadecimal strings
2019-01-04 23:31:44 +00:00
Neil Alexander
5a36b4723a
Add AWDL calls to exposed API, handle proto traffic first
2019-01-04 17:41:03 +00:00
Neil Alexander
3878197a59
gofmt
2019-01-04 17:23:37 +00:00
Neil Alexander
f29a098488
Add experimental dummy interface for AWDL
2019-01-04 17:14:40 +00:00
Neil Alexander
d10a0d6137
Add GenerateConfigJSON, fix StartJSON
2019-01-03 22:50:08 +00:00
Neil Alexander
f7b0a85b5e
Add StartJSON
2019-01-02 23:15:36 +00:00
Neil Alexander
4ff3db2309
Add dummy tun, helper functions
2019-01-02 18:05:54 +00:00
Neil Alexander
53aeca8fa2
Add some simple functions for Swift bindings (iOS)
2019-01-01 23:25:20 +00:00
Neil Alexander
1e29465af1
Fix debug builds (hopefully)
2018-12-31 12:08:15 +00:00
Neil Alexander
4d3e90cbfe
Merge branch 'develop' into nodeconfig
2018-12-31 11:55:37 +00:00
Neil Alexander
fb47c9822f
getNodeInfo: Show own info if box_pub_key/coords not specified
2018-12-31 11:48:50 +00:00
Neil Alexander
cd86c33850
Try to tidy up a bit, move checks for if we are already calling/connected
...
Something I noticed when working on reconfigure support for the "Listen"
option is that we have some rather huge weaknesses in our multicasting
design. Right now if we change our Listen address, it's not really
possible for remote nodes to know whether they are still connected to
us, so they start connecting in response to our changed beacons. They
can't know that they already know about us until *after* the handshake
but this registers in the local client log as repeated Connect/Disconnects
even though the existing peerings never actually drop.
2018-12-30 21:11:16 +00:00
Neil Alexander
80c9a1bc12
Don't track localAddr in conns as it is irrelevant
2018-12-30 16:48:34 +00:00
Neil Alexander
cb4495902b
Allow updating Listen during runtime
2018-12-30 15:21:09 +00:00
Neil Alexander
f96747181d
Allow updating AdminListen during runtime
2018-12-30 12:26:55 +00:00
Neil Alexander
7fae1c993a
Handle errors from reconfigure tasks
2018-12-30 12:04:42 +00:00
Neil Alexander
2925920c70
Use mutex in switch/tcp init
2018-12-29 19:53:31 +00:00
Neil Alexander
fa7c4117b4
Use Core.config in init functions
2018-12-29 19:14:26 +00:00
Neil Alexander
219fb96553
Support notifying components for config reload, listen for SIGHUP
2018-12-29 18:51:51 +00:00
Neil Alexander
4e03bdb054
Don't process ICMPv6 messages when in TUN mode
2018-12-26 22:45:21 +00:00
Neil Alexander
74692b689a
Fix OpenBSD (tested and working on 6.4)
2018-12-26 12:25:28 +00:00
Neil Alexander
b3d6c9a385
Print when peermacs learned
2018-12-26 11:57:08 +00:00
Neil Alexander
9eeb482587
Use ICMPv6 NDP target instead of source address when populating peermacs
2018-12-26 11:51:21 +00:00
Arceliar
50ed92d6d2
insert a copy when calling dht.insertPeer
2018-12-26 00:18:51 -06:00
Tristan B. Kildaire
b66049c14f
Typo fix
...
Typo fix in function's header comment.
2018-12-22 11:31:52 +02:00
Neil Alexander
0dfdc789d3
Merge pull request #275 from neilalexander/nodeinfomask
...
Allow hiding nodeinfo defaults
2018-12-22 08:54:37 +00:00
Arceliar
59093aa43b
clean up node info immediately if it reaches the timeout or if it needs refreshing but won't be pinged due to being unimportant
2018-12-21 17:45:24 -06:00
Neil Alexander
f6b0075989
Case-insensitive checking of null if string, don't print the nodeinfo again
2018-12-21 10:04:32 +00:00
Neil Alexander
586deed0f9
Add NodeInfoPrivacy option for not including defaults, and also check for null/"null" instead of "hide"
2018-12-21 09:56:34 +00:00
Arceliar
f59852b1e1
adjust how dht throttle works, it should now back off faster, and back off even more if things are not in use
2018-12-20 20:16:51 -06:00
Neil Alexander
60549cfa09
Adds special keyword 'hide' for masking built-in nodeinfo defaults
2018-12-20 23:49:15 +00:00
Arceliar
dfcdafa55c
move special peer/dht insert logic form router.go to dht.go
2018-12-20 17:37:59 -06:00
Neil Alexander
8ec4c66f65
Multithread the admin socket
2018-12-17 19:06:52 +00:00
Neil Alexander
6e87791e50
Merge pull request #256 from Arceliar/tcp
...
Minor TCP change
2018-12-17 10:20:23 +00:00
Arceliar
300f471bab
don't SetKeepAlive[Period] on tcp connections, since the behavior is platform specific
2018-12-16 18:32:50 -06:00
Arceliar
db034ce6bd
replace panics with warning messages if the tun reader/writer return an error
2018-12-16 17:23:07 -06:00
Arceliar
d9f212dd39
don't panic if we write to a closed tun device because tun.close() was called
2018-12-16 17:01:59 -06:00
Arceliar
28c7d75a20
fix conflicts with nodeinfo and update that for new crypto type names
2018-12-15 18:11:02 -06:00
Arceliar
89f9f5defb
fix merge conflicts
2018-12-15 17:57:36 -06:00
Neil Alexander
e0ff3ca587
Rename Metadata to NodeInfo
2018-12-15 22:37:11 +00:00
Neil Alexander
226c72df16
Set max metadata size to 16kb
2018-12-15 13:18:35 +00:00
Neil Alexander
07c26176b6
Fix core.SetMetadata
2018-12-15 12:21:00 +00:00
Neil Alexander
9a5cf96c29
Rename admin socket getMeta to getMetadata
2018-12-15 12:18:52 +00:00
Neil Alexander
92bb63f196
Use metadata from config file
2018-12-15 11:38:51 +00:00
Neil Alexander
d9884a5cac
Make use of metadata cache
2018-12-15 11:15:48 +00:00
Neil Alexander
d07e0ddfa0
Default metadata
2018-12-15 10:56:46 +00:00
Neil Alexander
8b63e841ea
Make threadsafe, add cache
2018-12-15 10:39:31 +00:00
Arceliar
4875ab8954
peer thread safey for dhtInfo updates
2018-12-14 21:44:31 -06:00
Arceliar
570e85c297
remove debug code
2018-12-14 21:12:25 -06:00
Arceliar
ea4ca02681
fix code after moving address/crypto/util
2018-12-14 20:49:18 -06:00
Neil Alexander
cdd2e7910a
Merge remote-tracking branch 'origin/develop' into metadata
2018-12-15 00:48:54 +00:00
Neil Alexander
d5031a5cb6
Metadata exchange without sessions
2018-12-15 00:48:27 +00:00
Arceliar
2c68d41409
move files, still need to fix exports and compile errors
2018-12-14 18:30:36 -06:00
Arceliar
abd8b69979
send a switch message immediately when peering, and use OS-level TCP keep-alive (shouldn't matter right now, since we have application-level keep-alive that preempts it, but important later)
2018-12-14 18:15:35 -06:00
Neil Alexander
f9dc300787
Define Adapter base type/interface
2018-12-14 18:29:00 +00:00
Neil Alexander
8045cb4dc3
Define generic adapter type, rename tunDevice to tunAdapter
2018-12-14 18:21:08 +00:00
Neil Alexander
f28360ce4d
Fix debug builds (foiled by debug builds every time)
2018-12-14 18:10:39 +00:00
Neil Alexander
2a38ad07cd
Don't send ICMPv6 back when tun disabled
2018-12-14 18:08:40 +00:00
Neil Alexander
9eaa2566c1
Parameterise tun.init
2018-12-14 18:08:13 +00:00
Neil Alexander
3ca5f10733
Don't try to correct peers with no schemes in addPeer
2018-12-14 17:52:54 +00:00
Neil Alexander
10157483f9
Move tunDevice into router
2018-12-14 17:35:02 +00:00
Neil Alexander
a9907a7878
Fix debug builds after 64060a4
2018-12-12 22:59:55 +00:00
Neil Alexander
64060a447c
Remove metadata-peer association until we have some sensible way to cache it
2018-12-12 22:58:16 +00:00
Neil Alexander
74de8c9416
Consistent function naming for metadata
2018-12-12 22:48:04 +00:00
Neil Alexander
042a3400fe
Wrap the metadata with a mutex to guarantee thread safety across core/router/sessions
2018-12-12 22:40:49 +00:00
Neil Alexander
97464feba9
Working metadata exchange
2018-12-12 19:51:28 +00:00
Neil Alexander
6200136fce
Merge branch 'descriptive' into metadata
2018-12-12 18:04:49 +00:00
Arceliar
6901e2fc9a
Merge pull request #238 from neilalexander/afunix
...
Use AF_UNIX socket by default for admin API
2018-12-10 17:34:36 -06:00
Neil Alexander
90ace46587
Enforce CKR cache size more strongly
2018-12-10 22:30:31 +00:00
Neil Alexander
65e34bbbab
Enforce maximum CKR routing cache size
2018-12-10 22:19:08 +00:00
Neil Alexander
f09adc2192
Update getRoutes format
2018-12-10 22:04:37 +00:00
Neil Alexander
dff1dca19c
Add DefaultConfigFile to defaults for yggdrasilctl
2018-12-10 10:20:59 +00:00
Neil Alexander
8aaaeb26eb
Default to /var/run/yggdrasil.sock for admin on Linux, BSDs
2018-12-10 00:37:32 +00:00
Neil Alexander
bbe2f56b74
Default to /var/run/yggdrasil.sock for admin on darwin/macOS
2018-12-10 00:31:31 +00:00
Neil Alexander
74a904d04c
Don't os.Chmod if we suspect the socket belongs to an abstract namespace
2018-12-10 00:26:12 +00:00
Neil Alexander
06c6dfc67f
Complain if socket file already exists
2018-12-10 00:19:21 +00:00
Neil Alexander
f791df4977
Try to chmod 660 the admin socket if using AF_UNIX
2018-12-10 00:00:23 +00:00
Neil Alexander
6801d713a7
Also don't start if AdminListen is empty
2018-12-09 17:53:31 +00:00
Neil Alexander
80d087404f
Allow disabling admin socket with AdminListen="none"
2018-12-09 17:46:48 +00:00
Neil Alexander
02f98a2592
Only show build name and version if it is known
2018-12-08 11:01:05 +00:00
Arceliar
af478e0e45
fix very special case bug when trying to dhtPing the root via the admin api
2018-12-08 00:42:13 -06:00
Arceliar
bd2d706745
fix bug from go vet while I'm at it
2018-12-07 20:36:30 -06:00
Arceliar
586781b49c
convert to go module
2018-12-07 19:56:04 -06:00
Neil Alexander
5149c6c349
Show build name and version at startup if available
2018-12-07 22:24:01 +00:00
Neil Alexander
3524c6eff6
Add build name and version to getSelf call on admin socket
2018-12-07 22:22:46 +00:00
Neil Alexander
8e784438c7
Imprint build name and version number if available
2018-12-07 22:20:11 +00:00
Arceliar
fe772dd38e
switch bugfixes
2018-12-05 18:22:39 -06:00
Arceliar
09228554cb
Merge pull request #223 from neilalexander/reusemulticast
...
Try to SO_REUSEPORT on multicast socket
2018-12-05 18:15:21 -06:00
Neil Alexander
ae48a1721e
Try to SO_REUSEADDR on Windows
2018-12-05 23:10:50 +00:00
Neil Alexander
eae8f9a666
Try to SO_REUSEPORT on UNIX platforms
2018-12-05 22:39:04 +00:00
Arceliar
3d4b49b693
reset the switch speed info for a peer whenever it changes coords, instead of only if they're a parent and change coords. Also, make sure packets in the sim preserve order when sending, to avoid races when testing
2018-12-03 19:21:23 -06:00
Arceliar
684632eb3d
Merge pull request #215 from Arceliar/switch
...
Latency-based parent selection for the switch
2018-12-02 17:26:26 -06:00
Neil Alexander
5a89a869be
Set queueTotalMaxSize before switch worker starts
2018-12-02 23:24:54 +00:00
Neil Alexander
b5f4637b5c
Enforce min 4MB switch queue total size
2018-12-02 23:20:11 +00:00
Neil Alexander
319457ae27
Update comment for MaxTotalQueueSize
2018-12-02 23:03:10 +00:00
Neil Alexander
86da073226
Add SwitchOptions and MaxTotalQueueSize
2018-12-02 22:49:27 +00:00
Arceliar
dcfe55dae8
store 'faster' relationships between all pairs of peers, to make fallback easier when a parent goes offline
2018-12-02 16:36:25 -06:00
Arceliar
38093219fd
dimensionless way to track how often nodes are faster than the current parent
2018-12-02 14:46:58 -06:00
Arceliar
b3e2b8e6a5
Update admin.go
...
Replace `nil` with `[]string{}` for `list`'s argument list.
2018-11-26 19:15:27 -06:00
Neil Alexander
099fee9cae
Rename destPubKey to box_pub_key in addRoute etc
2018-11-26 17:58:54 +00:00
Neil Alexander
315aadae06
Rename help to list
2018-11-26 17:51:30 +00:00
Neil Alexander
8239989c36
Send box_pub_key with getSessions, getDHT, getSwitchPeers and getPeers
2018-11-26 17:38:02 +00:00
Neil Alexander
5b10af7399
Rename key to box_pub_key in admin socket for consistency
2018-11-26 17:34:26 +00:00
Arceliar
d8d1e63c36
fix infinite loop from interaction between dht.isImportant and dht.insert
2018-11-25 20:33:33 -06:00
Arceliar
0ec6207e05
better response format and yggdrasilctl printing
2018-11-25 18:25:31 -06:00
Arceliar
a34ca40594
use a buffered channel to avoid races, and run gofmt
2018-11-25 17:59:36 -06:00
Arceliar
7954fa3c33
store one callback instead of many, needed to prevent search failures if there are multiple outstanding packets
2018-11-25 17:08:45 -06:00
Arceliar
9937a6102e
add callbacks to maintenance map cleanup
2018-11-25 16:29:47 -06:00
Arceliar
12e635f946
adjust dhtPing response so 'nodes' defaults to an empty list instead of null
2018-11-25 16:16:06 -06:00
Arceliar
d520a8a1d5
refactor dht code to call arbitrary callbacks instead of only searches.checkDHTRes, and add admin API fuction to dhtPing a node (with an optional target NodeID)
2018-11-25 16:10:32 -06:00
Arceliar
e17efb6e91
don't penalize dht timeouts a second time
2018-11-25 13:21:13 -06:00
Arceliar
9046dbde4f
remove sigManager, it seems safer to just burn the CPU than to store a map of strings of potentially arbitrary length
2018-11-25 13:06:54 -06:00
Arceliar
4e156bd4f7
better cleanup of maps
2018-11-25 12:25:38 -06:00
Arceliar
8d6beebac4
clean up old requests during dht maintenance
2018-11-24 20:04:14 -06:00
Neil Alexander
5a7c2b250c
Merge pull request #209 from Arceliar/switch-tune
...
Adjust switch parent selection behavior
2018-11-24 23:21:45 +00:00
Arceliar
6d0e40045a
cleanup/fixes from go vet
2018-11-22 21:41:16 -06:00
Arceliar
4870a2e149
removeSourceSubnet and removeRoute via the admin api
2018-11-22 21:30:56 -06:00
Arceliar
5953027411
switch from []byte to boxPubKey in ckr code, and start adding admin functions for existing code (yggdrasilctl.go still needs pretty printing support for the responses to the new get functions)
2018-11-21 00:10:20 -06:00
Arceliar
5fa23b1e38
move router.recvPacket calls into the main router goroutine, to make the ckr checks threadsafe
2018-11-20 22:04:18 -06:00
Arceliar
e9cff0506c
comment the switch a little better and limit how much uptime can affect which peer is used as a parent
2018-11-19 21:30:52 -06:00
Arceliar
ef6cece720
fix sim and tune dht to bootstrap a little faster
2018-11-16 19:32:12 -06:00
Neil Alexander
fc5a5830aa
Merge pull request #203 from Arceliar/chord
...
Chord
2018-11-14 20:13:42 +00:00
Arceliar
8cf8b0ec41
fix bug in recvPacket for packets coming from a subnet
2018-11-11 00:00:47 -06:00
Arceliar
1b1b776097
fix crash when starting in tun mode
2018-11-10 22:39:15 -06:00
Neil Alexander
6fab0e9507
Fix CKR (IPv4/IPv6) in TAP mode so frames sent to node MAC, base MAC/LL from node IPv6 address
2018-11-10 18:33:52 +00:00
Neil Alexander
adc32fe92f
Track further neighbor state, don't send more NDPs than needed
2018-11-10 17:32:03 +00:00
Neil Alexander
d50e1bc803
More complete NDP implementation for TAP mode, which tracks individual MAC addresses for neighbors
2018-11-10 15:46:10 +00:00
Arceliar
15d5b3f82c
comments and minor cleanup
2018-11-09 23:02:38 -06:00
Neil Alexander
685b565512
Check IP header lengths correctly per protocol
2018-11-07 10:29:08 +00:00
Neil Alexander
9542bfa902
Check the session perm pub key against the CKR key
2018-11-07 10:16:46 +00:00
Neil Alexander
fbfae473d4
Use full node ID for CKR routes instead of truncated node IDs from the address/subnet
2018-11-07 10:04:31 +00:00
Neil Alexander
39dab53ac7
Update comments in configuration and some godoc descriptions
2018-11-06 22:57:53 +00:00
Neil Alexander
a3a53f92c3
Reinstate length/bounds check in tun.go
2018-11-06 22:35:28 +00:00
Neil Alexander
0240375417
IPv4 CKR support in router
2018-11-06 20:49:19 +00:00
Neil Alexander
424faa1c51
Support IPv4 in ckr.go
2018-11-06 20:04:49 +00:00
Neil Alexander
cb7a5f17d9
Check destination address upon receive in router
2018-11-06 19:23:20 +00:00
Neil Alexander
2f75075da3
Fix Yggdrasil subnet routing
2018-11-06 14:28:57 +00:00
Neil Alexander
bc62af7f7d
Enable CKR properly from config
2018-11-06 12:32:16 +00:00
Neil Alexander
bc578f571c
Some output at startup
2018-11-06 11:56:32 +00:00
Neil Alexander
f0947223bb
Only validate CKR routes if CKR enabled
2018-11-06 11:11:57 +00:00
Neil Alexander
19e6aaf9f5
Remove sourceSubnet from router
2018-11-06 00:06:37 +00:00
Neil Alexander
e3d4aed44a
Configure IPv6Sources
2018-11-06 00:05:01 +00:00
Neil Alexander
8c2327a2bf
Add source addresses option and more intelligent source checking
2018-11-05 23:59:41 +00:00
Neil Alexander
cfdbc481a5
Modify source address check for CKR
2018-11-05 23:22:45 +00:00
Neil Alexander
7218b5a56c
Don't look up public keys for Yggdrasil native addresses
2018-11-05 23:12:26 +00:00
Neil Alexander
c7f2427de1
Check CKR routes when receiving packets in router
2018-11-05 22:58:58 +00:00
Neil Alexander
87b0f5fe24
Use CKR in router when sending packets
2018-11-05 22:39:30 +00:00
Neil Alexander
295e9c9a10
Cache crypto-key routes (until routing table changes)
2018-11-05 17:31:10 +00:00
Neil Alexander
ec751e8cc7
Don't allow Yggdrasil ranges as crypto-key routes
2018-11-05 17:03:58 +00:00
Neil Alexander
52206dc381
Add initial crypto-key routing handlers
2018-11-05 16:40:47 +00:00
Arceliar
a008b42f99
cleanup and some bugfixes, cache important dht nodes until something gets added/removed
2018-10-29 22:24:18 -05:00
Arceliar
671c7f2a47
don't update recv time for known nodes that ping us or known peers
2018-10-28 15:04:44 -05:00
Arceliar
c0531627bc
fix some chord dht bootstrapping bugs, no known cases where it now fails
2018-10-24 22:03:27 -05:00
Arceliar
253861ebd3
reverse dht ownership order from predecessor to successor, this plays nicer with the default 0 bits in unknown node IDs
2018-10-21 18:15:04 -05:00
Arceliar
5e3959f1d0
yet more debugging
2018-10-21 17:40:43 -05:00
Neil Alexander
20c4b7027a
Fix merge conflicts with endpoints branch
2018-10-21 23:24:29 +01:00
Neil Alexander
aab0502a4a
Remove friendlyname traces, preserve endpoints
2018-10-21 23:20:14 +01:00
Neil Alexander
a1b72c16d8
Some attempt at exchanging session metadata over the wire (broken)
2018-10-21 22:58:27 +01:00
Arceliar
f0bd40ff68
more testing
2018-10-21 15:10:18 -05:00
Arceliar
bcbd24120d
keep track of all keys we're supposed to care about in the dht, don't give special treatment to successors/predecessors
2018-10-21 14:57:04 -05:00
Arceliar
efe6cec11a
more debugging, trying to understand bootstrap issues
2018-10-21 12:28:21 -05:00
Neil Alexander
088d28a93b
Fix debug builds with friendly names
2018-10-21 18:04:02 +01:00
Neil Alexander
b809adf981
Add FriendlyName option, show friendly name and real endpoint in admin socket/yggdrasilctl
2018-10-21 17:57:48 +01:00
Arceliar
6c59ae862a
more debugging
2018-10-21 00:05:04 -05:00
Arceliar
95201669fe
reintroduce (better) dht throttling
2018-10-20 22:06:36 -05:00
Arceliar
8825494d59
remove maintenance searches and throttle logic, to focus on debugging in this simpler case first
2018-10-20 20:11:32 -05:00
Arceliar
3dbffae99f
add search for successor, via parent, to the dht maintenance cycle
2018-10-20 19:09:25 -05:00
Arceliar
d851d9afe7
add max pings before timing out a successor
2018-10-20 18:31:11 -05:00
Arceliar
63d6ab4251
more cleanup, comments, and dht reset() changes
2018-10-20 18:12:34 -05:00
Arceliar
f3ec8c5b37
fix admin dht function, more cleanup, and slowly throttle back dht traffic when idle
2018-10-20 17:58:54 -05:00
Arceliar
5a85d3515d
cleanup
2018-10-20 17:32:54 -05:00
Arceliar
02f0611dde
more debugging
2018-10-20 16:27:01 -05:00
Arceliar
1720dff476
add some debug output and get things to start working in the sim
2018-10-20 15:21:40 -05:00
Arceliar
03a88fe304
Try using a chord-like DHT instead of a kad-like one, work in progress, but it compiles at least
2018-10-20 14:48:07 -05:00
Neil Alexander
18428b0f93
Merge pull request #190 from neilalexander/sessionfirewall
...
Fix incorrect comment in config for SessionFirewall
2018-10-09 07:24:22 +01:00
Neil Alexander
eb42fd4973
Fix incorrect comment in config for SessionFirewall
2018-10-09 07:18:43 +01:00
Arceliar
ba8af20817
Merge pull request #187 from neilalexander/sessionfirewall
...
Add session firewall
2018-10-08 18:41:15 -05:00
Neil Alexander
1d00131416
Hopefully fix a concurrent map read-write when removing peers
2018-10-08 22:09:55 +01:00
Neil Alexander
1e6667567a
Update comments for session firewall in config
2018-10-08 19:57:14 +01:00
Neil Alexander
3ed63ede1e
Add AlwaysAllowOutbound to session firewall
2018-10-08 19:51:51 +01:00
Neil Alexander
3f237372c9
Only apply session firewall to pings for sessions we don't already have
2018-10-08 19:05:50 +01:00
Neil Alexander
2e2c58bfef
Add session firewall (extra security for controlling traffic flow to/from a given node)
2018-10-07 17:13:41 +01:00
Neil Alexander
81eea137d4
Merge branch 'develop' into getswitchqueues
2018-10-05 19:51:45 +01:00
Neil Alexander
605b6829db
Fix debug builds (broken by #182 )
2018-10-05 19:28:46 +01:00
Neil Alexander
8eed15b813
Fix merge conflict in tcp.go from d027a9ba75
2018-10-04 12:26:08 +01:00
Neil Alexander
b6ff6e96cd
Merge pull request #184 from yggdrasil-network/source-interface
...
Ignore peer in InterfacePeers when source interface not found
2018-09-28 15:16:34 +01:00
Neil Alexander
d027a9ba75
Don't peer when source interface not found
2018-09-28 14:59:10 +01:00
Neil Alexander
69cd736112
Show queue capacity in getSwitchQueues
2018-09-27 16:19:47 +01:00
Neil Alexander
0b1a6611fd
Identify switchport for queue based on coords in stream ID
2018-09-27 15:05:45 +01:00
Neil Alexander
8113b4cc22
Update comments
2018-09-27 14:20:52 +01:00
Neil Alexander
b530916044
Show information about individual active queues
2018-09-27 12:14:55 +01:00
Neil Alexander
2674e1cb8b
Merge remote-tracking branch 'origin/develop' into getswitchqueues
2018-09-27 11:03:59 +01:00
Neil Alexander
f57567ea56
Add getSwitchQueues
2018-09-27 10:53:19 +01:00
Arceliar
7e3426ba93
Merge pull request #182 from yggdrasil-network/source-interface
...
Support adding peers on specific interfaces
2018-09-26 07:48:55 -05:00
Neil Alexander
b7f2f8b55c
Ignore interfaces that are not up
2018-09-25 19:46:06 +01:00
Neil Alexander
6844b9df51
Update comments in default config
2018-09-25 18:17:00 +01:00
Neil Alexander
387ae9ea6c
Only replace call name with interface prefix when interface is set
2018-09-25 18:05:57 +01:00
Neil Alexander
3f8a4ab17d
Add bytes_sent and bytes_recvd to getSwitchPorts
2018-09-25 17:59:01 +01:00
Neil Alexander
b368421dbd
Fix addPeer to make interface= optional
2018-09-25 17:13:35 +01:00
Neil Alexander
1796000b05
Change to InterfacePeers instead of modifying the tcp:// URI format
2018-09-25 16:55:57 +01:00
Neil Alexander
aecc151baf
Add support for specifying TCP source interface, i.e. tcp://a.b.c.d:e/eth0, for multiple simultaneous peerings to the same node over different interfaces
2018-09-25 15:32:45 +01:00
Arceliar
25661ebcad
fix 0 port number on links to unknown nodes in the admin dot graph
2018-09-04 19:30:07 -05:00
Arceliar
e833cdfb98
fix debug builds and update whitepaper with old info from the .io site's about page
2018-08-18 13:24:02 -05:00
cathugger
b4db89ea9d
Avoid unnecessarily allocating coords slice if it's unchanged.
2018-07-30 13:44:46 +00:00
cathugger
67b8a7a53d
Ensure no memory allocations happen at hot path
2018-07-30 12:43:34 +00:00
Neil Alexander
c4e6894d6a
Copy sinfo.coords for safety
2018-07-30 13:34:32 +01:00
Neil Alexander
ebb4ec7c33
Clean up the flow a bit (partly because I am allergic to huge compounded if statements)
2018-07-30 11:46:44 +01:00
cathugger
68a482ed92
Simplify flowkey stuff further.
2018-07-30 02:15:57 +00:00
cathugger
36dcab9300
optimize wire_put_uint64; use protokey for flowlabel fallback.
2018-07-30 01:58:52 +00:00
cathugger
fec7100898
Clean up / clarify coords sending code.
2018-07-30 00:01:37 +00:00
cathugger
11b0a82c4a
Simpler flowlabel parsing; avoid using 0 flowlabel.
2018-07-29 22:09:16 +00:00
Arceliar
ddab8ecf33
Merge pull request #174 from cathugger/develop
...
Make TCP read timeouts configurable.
2018-07-29 10:39:43 -05:00
cathugger
d171552577
Make TCP read timeouts configurable.
...
This should be helpful on high-latency networks, like Tor or I2P.
Also gofmt.
2018-07-29 14:30:13 +00:00
Neil Alexander
38e8b036d2
Use addUint64 instead to not interfere with coordinate parsing
2018-07-22 18:33:53 +01:00
Neil Alexander
81fde1a805
Use flow label instead of TCP/UDP/SCTP source/destination ports
2018-07-22 18:16:03 +01:00
Neil Alexander
3f4295f8cd
Only split queues based on port number for TCP/UDP/SCTP, rely only on protocol number for other protos to prevent issues with IPIP, GRE, etc
2018-07-22 12:00:40 +01:00
Arceliar
9cbcaf39ac
Use coords for queue stream IDs in the switch, and append protocol/port information to coords when sending, to designate different streams
2018-07-21 18:59:29 -05:00
Arceliar
996a593fa2
Sort dotgraph links by integer value
2018-07-20 23:02:25 -05:00
Arceliar
549d6f9dd2
Merge pull request #163 from neilalexander/tapmtu
...
Cap MTU on Linux in TAP mode
2018-07-19 18:25:03 -05:00
Arceliar
9ff08c1b34
Merge pull request #165 from cathugger/master
...
rearrange tcp reading loop
2018-07-19 18:18:51 -05:00
cathugger
91a374d698
rearrange tcp reading loop
...
according to documentation of io.Reader interface,
"Callers should always process the n > 0 bytes returned before considering the error err. Doing so correctly handles I/O errors that happen after reading some bytes and also both of the allowed EOF behaviors."
2018-07-19 21:58:53 +00:00
Neil Alexander
55b56e8686
Normalise startup output for TUN/TAP on Linux and Windows
2018-07-19 10:15:26 +01:00
Neil Alexander
df9cadd938
Cap MTU on Linux in TAP mode
2018-07-19 10:01:12 +01:00
Arceliar
1baafdd17d
Merge pull request #162 from cathugger/master
...
More verbose disconnect messages
2018-07-18 22:55:45 -05:00
cathugger
f4bb2aaaeb
More verbose disconnect messages
2018-07-19 01:03:24 +00:00
Neil Alexander
cff7ef026f
Make yggdrasilctl less case-sensitive
2018-07-09 19:30:41 +01:00
Neil Alexander
f21cbaef9c
Fix debug builds after changes in #155
2018-07-09 09:38:48 +01:00
Neil Alexander
d59bdfeb99
Fail to TCP when parsing AdminListen
2018-07-08 10:37:20 +01:00
Arceliar
bf90447cc4
update admin socket error message and run gofmt
2018-07-07 19:37:36 -05:00
Neil Alexander
b24c7ffa6b
Resolve merge conflict with platformdefaults
2018-07-07 20:08:23 +01:00
Neil Alexander
a5af69df8a
Use Close() for admin socket
2018-07-07 20:04:11 +01:00
Neil Alexander
2a931df07a
Try to clean up UNIX domain admin sockets if shutdown properly
2018-07-07 12:34:10 +01:00
Neil Alexander
14d48597da
Fix openbsd and netbsd
2018-07-07 12:18:03 +01:00
Neil Alexander
36c89da848
Stick with tcp://localhost:9001 as default for now
2018-07-07 12:16:55 +01:00
Neil Alexander
1692bd98fd
Centralise platform defaults into the 'defaults' package
2018-07-07 12:08:52 +01:00
Neil Alexander
cd6030ec8f
Add support for UNIX domain admin sockets and specifying URIs in AdminListen
2018-07-07 11:22:49 +01:00
Arceliar
ba4047b51a
correctly update buffer sizs when buffers overflow, and returned freed packets to the byte store
2018-07-06 17:27:04 -05:00
Arceliar
ad5dc9ea87
Drop 1 packet instead of a whole queue when overflowing
2018-07-06 00:55:00 -05:00
Arceliar
e6a47f705d
when dropping a queue, select one at random based on queue size in bytes
2018-07-06 00:11:36 -05:00
Arceliar
1a65c065d0
prioritize sending from small queues that have been blocked for a long time
2018-07-05 23:56:37 -05:00
Arceliar
7da4967f5e
Limit maximum queue size to 4 MB
2018-07-05 23:39:41 -05:00
Arceliar
a7c8be4d69
base backpressure decisions on queue size in bytes, instead of packet counts
2018-07-05 23:07:01 -05:00
Arceliar
b63b534fa7
drop packets that have been queued for longer than some timeout (currently 25ms) instead of using fixed length queues
2018-06-25 18:12:18 -05:00
Arceliar
7695a3fcbf
try using a simpler FIFO order for each backpressure buffer, since there are other mechanisms to penalize the flooding node, leads to better TCP throughput without affecting traffic between other nodes (does affect traffic in the same session, but there's hypothetically workarounds to that)
2018-06-24 20:20:07 -05:00
Arceliar
4ad2446557
cleanup
2018-06-24 18:21:00 -05:00
Arceliar
03949dcf3f
fix my terrible bug, I have no idea why the old one even worked
2018-06-24 18:05:00 -05:00
Arceliar
9c028e1d0d
switch to a separate queue per stream of traffic, FIXME for some reason this makes distance calculations more expensive in handleIdle?
2018-06-24 17:39:43 -05:00
Arceliar
189628b381
cleanup
2018-06-23 23:55:27 -05:00
Arceliar
0ad801bcfe
more work on backpressure, but still needs more testing
2018-06-23 23:33:03 -05:00
Arceliar
4b83efa218
more backpressure work, still needs testing
2018-06-23 21:51:32 -05:00
Arceliar
52a0027aea
switch refactoring, setup for a better approximation of local backpressure
2018-06-23 20:59:26 -05:00
Arceliar
988f4ad265
add a dedicated switch worker and start using it for lookups
2018-06-23 19:08:32 -05:00
Arceliar
2ae213c255
I'll try sorting, that's a good trick
2018-06-23 01:10:18 -05:00
Arceliar
cceecf4b1a
larger out queue size, make sure linkOut packets always get sent first
2018-06-22 23:46:42 -05:00
Arceliar
0021f3463f
slightly better way for the tcp sender goroutine(s) to block waiting for work
2018-06-22 20:39:57 -05:00
Neil Alexander
f68f779bee
Change box_pub_key to key in admin API
2018-06-22 22:26:17 +01:00
Arceliar
5dfa01a0e8
periodically clean up timed-out sessions and old signatures, instead of trying to do it when creating new sessions or adding new signatures
2018-06-21 20:31:30 -05:00
Arceliar
254be42614
gofmt
2018-06-21 10:39:43 -05:00
Arceliar
19014a198e
randomize the delay after tcp disconnects, to prevent synchronization issues
2018-06-21 10:38:31 -05:00
Arceliar
f599a1a2c1
start the pprof based on an env variable in debug builds, otherwise remove the flag/release.go stuff
2018-06-21 10:32:16 -05:00
Arceliar
496dc94f02
possibly mitigate livelock bug where lossy links lead to constant connect/disconnect cycles due to disagreement about which of the two duplicate autoconnection attempts to use
2018-06-16 15:31:25 -05:00
Arceliar
7fe038f87e
prevent parent nodes from forcing coord oscillation, have dht.handleRes clean up the old request info immediately
2018-06-14 12:32:18 -05:00
Neil Alexander
6c556da05e
Merge pull request #125 from Arceliar/cleanup
...
Cleanup
2018-06-14 15:26:34 +01:00
Arceliar
d9c9787611
avoid the proxy.SOCK5 connection attempt unless we're actually going to use the dialer
2018-06-14 09:21:35 -05:00
Arceliar
e8eaabf0c8
comment
2018-06-14 09:12:58 -05:00
Arceliar
57837057b7
tcp/socks cleanup
2018-06-14 09:11:34 -05:00
Arceliar
f7a7f601a0
cleanup old ugly session MTU code that only mattered with lossy UDP fragments
2018-06-14 08:38:43 -05:00
Arceliar
93ffc0b876
macos
2018-06-14 08:00:57 -05:00
Arceliar
e7fca66655
fix address/prefix code, platform specific parts still need testing
2018-06-14 07:58:07 -05:00
Arceliar
330175889e
switch address range from fd00::/8 to the deprecated 0200::/7 range
2018-06-14 07:08:48 -05:00
Arceliar
cd514799da
recover if p.doSend is closed due to a race between peers.doSendSwitchMsgs and peers.removePeer
2018-06-13 00:24:12 -05:00
Arceliar
b006748da4
code cleanup
2018-06-12 17:50:08 -05:00
Arceliar
9ce428af66
Merge pull request #112 from neilalexander/documentation
...
Adds more comments to ICMPv6 and TUN/TAP.
2018-06-12 17:11:24 -05:00
Neil Alexander
8e2c2aa977
Document ICMPv6 and TUN/TAP
2018-06-12 22:45:53 +01:00
Arceliar
24228bd381
disable unused configuration Net field and clean up comments to remove mention of UDP where no longer applicable
2018-06-12 14:00:04 -05:00
Arceliar
359af66d0d
exponential dht throttle backoff, and make it based on when packets were sent as part of bootstrapping/maintenance, not when arbitrary packets were received
2018-06-12 03:16:10 -05:00
Arceliar
56802d569e
minor documentation updates, code comments, and a couple of bugfixes that I noticed when going through the code to comment it
2018-06-10 18:03:28 -05:00
Arceliar
038a51fd13
it helps to add new files
2018-06-09 18:44:59 -05:00
Arceliar
72cca4ea43
version check/warning adjustments
2018-06-09 18:38:30 -05:00
Arceliar
076350f963
remove old tcp key exchange code
2018-06-09 17:49:02 -05:00
Arceliar
8733099516
add version metadata to key exchange at the start of connections
2018-06-09 17:46:19 -05:00
Arceliar
f5c850f098
better way to do wire signed ints (no negative zero, remove conditionals)
2018-06-09 16:36:13 -05:00
Arceliar
e5eb6de1f6
add inner crypto to linkProtoTraffic, using ephemeral keys, to prevent replay attacks from spoofing peer connections
2018-06-08 18:42:56 -05:00
Arceliar
1dcc60f054
check root before accepting that a message is good and unblocking a new peer
2018-06-08 17:33:16 -05:00
Arceliar
f30d040366
Merge branch 'master' of https://github.com/yggdrasil-network/yggdrasil-go into develop
2018-06-08 16:17:24 -05:00
Arceliar
495891d9e8
remove testing panics
2018-06-07 22:32:01 -05:00
Arceliar
e29f700dd6
enable multicast on interfaces that come up after startup
2018-06-07 22:07:19 -05:00
Arceliar
ea1d21f7e5
don't change dhtInfo.pings when sending a search, to prevent multiple different searches from evicting a node
2018-06-07 21:28:08 -05:00
Arceliar
bced15b138
remove TTL from traffic packets
2018-06-07 20:29:22 -05:00
Arceliar
84c13fac90
don't use TTL
2018-06-07 20:18:13 -05:00
Arceliar
fe12e1509a
add a throttle to nodes in the dht. the throttle is gradually increased each time the node is pinged. it determines the minimum amount of time to wait between using the node in a bootstrapping search
2018-06-07 17:55:43 -05:00
Arceliar
ec1c173ca5
it helps to check that messages decoded correctly
2018-06-07 16:53:39 -05:00
Arceliar
bcfeb22915
more tcp debugging
2018-06-07 16:49:51 -05:00
Arceliar
63feed8dc3
adjust tcp timeout and add shadow queues to track dropped packets
2018-06-07 15:04:17 -05:00
Arceliar
c1f8baf9b5
update dht.reset() to possibly play better with coord changes
2018-06-07 14:39:43 -05:00
Arceliar
d468882147
cleanup
2018-06-07 14:24:02 -05:00
Arceliar
f8ba80e7d8
remove old switchMessage and clean up related code
2018-06-07 14:13:31 -05:00
Arceliar
00e4da28c7
use/store switchMsg in the switch instead of going through the old switchMessage
2018-06-07 13:56:11 -05:00
Arceliar
3dab94be9f
keep dht peers alive
2018-06-07 10:58:24 -05:00
Arceliar
deb755e3e9
remove peer.linkIn channel and related logic
2018-06-07 00:49:06 -05:00
Arceliar
ecf37cae8a
make the switch react to peer coord changes immediately, and send out updates immediately
2018-06-07 00:16:47 -05:00
Arceliar
85afe187ff
remove peer timeout logic from the switch, so switch peer entrires are only removed when the peer struct is removed
2018-06-06 23:23:16 -05:00
Arceliar
3b783fbf97
move periodic switch maintenance into the router instead of its own goroutine
2018-06-06 23:10:33 -05:00
Arceliar
5dc0cb5544
move wire_encode_locator logic into getBytesForSig, since that's the only place it's used
2018-06-06 23:00:17 -05:00
Arceliar
1e7d34492d
fix signature checks and add some TODO reminder comments
2018-06-06 22:39:22 -05:00
Arceliar
5fb33da3a2
remove old switch anc/hop/res code
2018-06-06 21:18:21 -05:00
Arceliar
6811759fc9
add new switchMsg struct to replace old anc/hop/res approach
2018-06-06 21:11:10 -05:00
Arceliar
690d29435d
adjust link packet logic so they bypass the lifo stack and are delivered first
2018-06-06 17:44:10 -05:00
Arceliar
bbae9ff8e8
Merge pull request #92 from Arceliar/backpressure
...
Use backpressure instead of estimated bandwidth
2018-06-06 16:58:48 -05:00
Arceliar
fad6f6b50e
remove udp.go
2018-06-06 16:57:36 -05:00
Arceliar
da928af361
fix sim and run gofmt
2018-06-06 16:49:23 -05:00
Arceliar
240841eb38
remove unused recursive search packets
2018-06-06 16:46:15 -05:00
Arceliar
1b89892610
remove UDP, to be replaced with a better implementation later
2018-06-06 16:40:35 -05:00
Neil Alexander
6d9d01dae1
Fix IfName='none'
2018-06-02 23:29:06 +01:00
Arceliar
b9ea5350c6
update search.go comments to describe the iterative approach
2018-06-02 16:45:45 -05:00
Arceliar
3e1ac81854
allow searches to start with nodes further from the destination than ourself
2018-06-02 16:39:34 -05:00
Arceliar
45abfafbba
value instead of pointer types for search dest/mask
2018-06-02 16:33:58 -05:00
Arceliar
34939d4b18
update for wire format changes
2018-06-02 16:30:05 -05:00
Neil Alexander
bbdcee1015
Export fields of sessionPing, dhtReq, dhtRes
2018-06-02 22:19:42 +01:00
Neil Alexander
49af65296d
Export fields of wire structs
2018-06-02 21:21:05 +01:00
Arceliar
28e6c738e2
Merge branch 'master' into iterdht
2018-06-02 15:00:24 -05:00
Arceliar
09baad48e3
retry failed iterative searches, possibly becoming parallel if things are just slow, and keep track of / skip nodes that were already visited in the search
2018-06-02 14:57:06 -05:00
Neil Alexander
bc37d4fb76
Improve formatting of dot: dashed grey for unknown nodes, sans-serif text
2018-06-02 14:24:06 +01:00
Arceliar
ed6c9c2a54
deduplicate dht responses when adding them to the search, limit the search toVisit size
2018-06-02 00:29:36 -05:00
Arceliar
10a72444e3
get itersearch to run in the sim
2018-06-02 00:16:47 -05:00
Arceliar
ecf7e490d7
start of iterative dht searches
2018-06-01 23:34:21 -05:00
Neil Alexander
ec80a81ed5
Mark extrapolated nodes with dashed outline
2018-06-01 23:33:02 +01:00
Neil Alexander
e4082f218f
Add text to dot graph explaining how a node is known
2018-06-01 23:23:24 +01:00
Neil Alexander
a2df5107f0
Change colour scheme: green for self, yellow for peer, blue for open session, white for DHT
2018-06-01 14:20:47 +01:00
Arceliar
ca15bbea57
try color coding dot output
2018-05-31 20:28:09 -05:00
Neil Alexander
ccf71af6b7
Move Init from core.go to debug.go as function is only for simulator
2018-05-27 23:37:57 +01:00
Neil Alexander
460a22c063
Clean up some exported constants
2018-05-27 23:31:34 +01:00
Neil Alexander
a9e61d0d37
Add support for building "release" builds that don't contain pprof which are substantially smaller. To build a "debug" build, use "-tags debug" with "go build"
2018-05-27 23:22:50 +01:00
Neil Alexander
35173e2388
Fix starting TUN read/write
2018-05-27 22:35:30 +01:00
Neil Alexander
4c115de633
De-debug
2018-05-27 22:13:37 +01:00
Arceliar
38e7704161
use backpressure instead of estimated bandwidth, sorted by uptime to break ties
2018-05-27 13:37:35 -05:00
Arceliar
02ba9dc97c
fix npe, these don't need to be pointers
2018-05-27 13:22:21 -05:00
Arceliar
7b12493417
panic if tcp startup fails, since otherwise a nil pointer occurs in multicast. make udp do the same thing.
2018-05-27 12:56:33 -05:00
Neil Alexander
a0f547cc1b
Fix being able to enable/disable multicast
2018-05-26 21:50:47 +01:00
Neil Alexander
bc899c395a
Fix accidental truncation of addresses ending in 8 on macOS and BSD
2018-05-26 21:47:54 +01:00
Neil Alexander
5d87601118
Add getMulticastInterfaces and getSelf to yggdrasilctl
2018-05-23 22:13:52 +01:00
Neil Alexander
1fd53bcb7d
Update comments in configuration
2018-05-23 14:02:13 +01:00
Neil Alexander
ce854a76bd
Add -normaliseconf option and temporarily correct old config item names in running config
2018-05-23 12:04:27 +01:00
Neil Alexander
9d9083e373
Update configuration names, fix multicast interface selection
2018-05-23 11:28:20 +01:00
Neil Alexander
6f79184c9b
Move multicasting into yggdrasil package
2018-05-23 11:13:53 +01:00
Neil Alexander
388ae09fca
Rename some config items
2018-05-22 23:43:29 +01:00
Arceliar
b10ae51565
Merge pull request #85 from neilalexander/yggdrasilctl
...
Human-readable formatting in yggdrasilctl
2018-05-21 19:21:00 -05:00
Neil Alexander
04b3e84023
Show your IPv6 address and subnet when starting
2018-05-21 16:15:31 +01:00
Neil Alexander
9567446f50
Offload formatting to yggdrasilctl and keep precision in JSON
2018-05-21 15:21:23 +01:00
Neil Alexander
59688dcab3
Fix formatting of bytes_sent, bytes_recvd, last_seen, uptime
2018-05-21 15:05:01 +01:00
Neil Alexander
ca3e541d3b
Friendly formats for getDHT, getSessions, setTunTap etc
2018-05-21 14:14:57 +01:00
Neil Alexander
201701ae4a
Add some pretty printing to yggdrasilctl, small modifications to JSON formatting in admin socket
2018-05-21 13:54:51 +01:00
Neil Alexander
bd32f5890b
Run gofmt -s -w
2018-05-21 07:28:03 +01:00
Neil Alexander
79131bb959
Minor tweaks
2018-05-20 23:25:07 +01:00
Neil Alexander
aae570de2a
Optional parameters are now square instead of pointed brackets, avoid nils for help
2018-05-20 21:57:05 +01:00
Neil Alexander
c765e0566f
Convert rest of functions, fix setTunTap
2018-05-20 21:54:15 +01:00
Neil Alexander
c75566d5ac
Various fixes and error catching, add setTunTap
2018-05-20 21:44:30 +01:00
Neil Alexander
4ecc7ce860
Add getTunTap to JSON admin socket
2018-05-20 19:42:37 +01:00
Neil Alexander
c3ca5c64b1
Add some more functions to JSON admin socket
2018-05-20 19:23:43 +01:00
Neil Alexander
9713e73969
Fix dot
2018-05-20 17:25:13 +01:00
Neil Alexander
a6ef7166ea
Start JSON-ifying the admin socket
2018-05-20 17:21:14 +01:00
Arceliar
5c0636eb3d
add uptime and bytes sent/recvd to peer struct and getPeers
2018-05-18 20:41:02 -05:00
Neil Alexander
ca96bbf014
Accept exchanging an MTU of 0 to signify that TUN/TAP is disabled, don't send traffic to a node in that case
2018-05-18 18:56:33 +01:00
Neil Alexander
ec371af84f
Track TX/RX bytes over session and if MTU was adjusted, add to admin socket getSession
2018-05-18 17:59:29 +01:00
Arceliar
ec8fe338d5
more insertIfNew bugfixes, and add peerOnly to getDHT output (true if a node is in the bucket.peers slice instead of bucket.others--it means they're not regularly pinged, they're only there to make sure DHT lookups include them as a result, for bootstrapping reasons)
2018-05-17 21:43:26 -05:00
Arceliar
fe518f4e3f
bugfixes related to peer timeouts in the DHT, significantly improve DHT bootstrap speed
2018-05-17 21:20:31 -05:00
Arceliar
8d9887294c
add dht time since last ping to admin socket, some DHT code cleanup, bugfix to insertIfNew
2018-05-17 19:32:29 -05:00
Arceliar
d98640fd59
switch cleanup
2018-05-16 17:48:53 -05:00
Arceliar
6b51b44cbf
slightly better variable naming
2018-05-16 17:36:37 -05:00
Arceliar
800ccaa3d4
cleanup
2018-05-16 17:32:26 -05:00
Arceliar
fe712d24f8
don't allow buckets to overflow when the next bucket isn't full
2018-05-16 17:24:38 -05:00
Arceliar
8228242eed
misc dht and tree changes to stabilize coords and bootstrap the dht faster
2018-05-15 23:57:00 -05:00
Arceliar
96c55da987
Merge pull request #76 from neilalexander/hjson
...
Use HJSON for config instead of JSON
2018-05-13 15:09:28 -05:00
Neil Alexander
5299783e35
Add getTunTap to admin socket
2018-05-10 09:48:12 +01:00
Neil Alexander
e381808704
Add ability to select interface by friendly name on Windows
2018-05-09 16:42:24 +01:00
Neil Alexander
8ea3070a02
Small tweaks/clean up
2018-05-09 14:03:28 +01:00
Neil Alexander
45b106168e
Use HJSON instead of JSON
2018-05-09 13:54:31 +01:00
Arceliar
5dac273a3d
rename to 'AllowedBoxPubs' and similar
2018-05-07 17:05:54 -05:00
Arceliar
6ce16d8192
debug admin socket
2018-05-06 19:48:26 -05:00
Arceliar
94dd231e13
add (not working) admin functions for auth keys, needs debugging
2018-05-06 19:31:19 -05:00
Arceliar
0b391b6e3a
debugging and cleanup
2018-05-06 19:01:52 -05:00
Arceliar
80f893aac3
let the peer's linkLoop call close if the peer receives no announcements for too long
2018-05-06 17:17:12 -05:00
Arceliar
6026e0a014
Optional peer authentication, if non-empty then incoming TCP and all UDP peers must match one of these box keys
2018-05-06 16:32:34 -05:00
Arceliar
3a1b67da8c
Update admin.go
2018-05-05 20:20:38 -05:00
Arceliar
cdedd304af
make removePeers work for TCP connections and minor admin cleanup
2018-05-05 17:14:03 -05:00
Arceliar
8b9a91be57
possibly fix weird issue I was having with netns, still not sure I understand why it was a problem
2018-04-28 16:39:58 -05:00
Neil Alexander
bdf9e45082
Default to previous scheme when url.Parse returns an error
...
In response to:
```
panic: parse x.x.x.x:xxx: first path segment in URL cannot contain colon
goroutine 33 [running]:
yggdrasil.(*Core).DEBUG_addPeer(0x8e58000, 0x8e34080, 0x12)
/go/src/github.com/{{ORG_NAME}}/{{REPO_NAME}}/src/yggdrasil/debug.go:317 +0x420
main.(*node).init.func1(0x8e48000, 0x8e58000)
/go/src/github.com/{{ORG_NAME}}/{{REPO_NAME}}/yggdrasil.go:75 +0x70
created by main.(*node).init
/go/src/github.com/{{ORG_NAME}}/{{REPO_NAME}}/yggdrasil.go:69 +0x410
```
2018-04-27 09:53:31 +01:00
Jeff Becker
fe13fea1e5
remove hard coded tor config options
2018-04-26 10:26:10 -04:00
Jeff Becker
7756891510
support socks proxy in peer url and decouple explicit tor/i2p routing
2018-04-26 10:23:21 -04:00
Jeff Becker
769b058004
more docs
2018-04-25 10:11:11 -04:00
Jeff Becker
1be8bbed1c
more docs
2018-04-25 10:09:09 -04:00
Jeff Becker
de69860e9b
* only enable tor proxy dialer when tor is enabled
...
* add docstrings
2018-04-25 10:06:13 -04:00
Jeff Becker
c16e354a44
Merge remote-tracking branch 'origin/master' into tor-auto
2018-04-25 10:01:10 -04:00
Arceliar
8ef2e55de6
try sending pings before sending searches for an unresponsive session
2018-04-22 15:31:30 -05:00
Jeff Becker
5e23185ddc
use address only not port
2018-04-20 08:41:09 -04:00
Jeff Becker
3c4fee0492
tor auto config
2018-04-19 10:30:40 -04:00
Neil Alexander
48ced483d6
Merge pull request #64 from Arceliar/dht
...
Limit DHT pings to 1/min per node
2018-03-17 20:46:47 +00:00
Arceliar
fe5ef4e867
don't add things to the dht rumorMill if they've been pinged in the last minute (arbitrary time, needs investigating)
2018-03-17 15:28:22 -05:00
Arceliar
0459f88b92
add a udp close packet, and partial support for a removePeer admin call (sends close to UDP peers, but doesn't close TCP connections yet)
2018-03-16 18:24:28 -05:00
Neil Alexander
bf0413a0c4
Modify ICMPv6 source address for "Packet Too Big" messages to a routable address so that it correctly routes to nodes in an yggdrasil /64 subnet
2018-03-10 22:31:36 +00:00
Arceliar
b34345229a
remove any peers from the dht if a reset is triggered (from coord changes)
2018-03-10 15:16:39 -06:00
Arceliar
9ce0b7fbea
keep peers separate from other nodes in dht
2018-03-10 13:58:48 -06:00
Neil Alexander
1155816df8
Show both UDP and TCP listen addresses in stdout ( #51 )
2018-03-07 09:41:04 +00:00
Neil Alexander
166d25619d
Attempt to support NetBSD
...
This code actually consolidates a lot of the BSD code together, and even setting the interface MTU with SIOCSIFMTU seems to work fine.
What doesn't work though is setting the interface address using SIOCSIFADDR_IN6, which I attempted to plagiarise from the Darwin code.
As a fallback, ifconfig is used, which solves the problem enough to get it working.
2018-03-04 23:47:01 +00:00
Arceliar
cd0d1a1d26
get the fd instead of depending on water to do it
2018-03-04 13:57:34 -06:00
Arceliar
039c4a5a35
only try to build on openbsd and freebsd for now, darwin needs work too
2018-03-04 11:02:54 -06:00
Arceliar
478b80a07a
cleanup
2018-03-04 10:56:46 -06:00
Arceliar
e7726cfb00
deduplicate some bsd tuntap code, still untested
2018-03-04 10:55:32 -06:00
Neil Alexander
c30792245a
Add FreeBSD support in TAP mode
2018-03-04 16:24:50 +00:00
Neil Alexander
a92e6c2588
Merge pull request #29 from Arceliar/netlink
...
Linux: use netlink instead of ip
2018-03-04 10:47:34 +00:00
Arceliar
5ec6265a70
use netlink instead of ip commands to set address/mtu and bring up the tuntap device on linux
2018-03-03 16:41:36 -06:00
Arceliar
0460fdd301
panic if tun.write or tun.read returns an error and was launched from debug.go, since there's no way to recover in these scenarios
2018-03-03 13:56:26 -06:00
Arceliar
a367f2ca17
gofmt
2018-03-03 11:49:24 -06:00
Arceliar
0578a9f273
manual merge
2018-03-03 11:07:08 -06:00
Neil Alexander
4e5627f933
Update default interface MTU to use per-platform instead of global value
2018-03-03 12:43:39 +00:00
Neil Alexander
4917ea3dd2
Per-platform TUN defaults
2018-03-03 12:30:54 +00:00
Neil Alexander
bec898a326
Don't allow exceeding maximum MTU for a given platform
2018-03-03 11:47:14 +00:00
Neil Alexander
7c0102e43d
Be a little bit less verbose on OpenBSD
2018-03-01 15:31:49 +00:00
Neil Alexander
6640b33334
Fix using 'auto' as device name on OpenBSD - default to /dev/tap0
2018-03-01 15:19:20 +00:00
Neil Alexander
24be3f1d67
Turns out FreeBSD is a bit different so restrict this to OpenBSD for now
2018-03-01 15:11:12 +00:00
Neil Alexander
90393ae03b
Set interface flags properly on OpenBSD
2018-03-01 15:02:53 +00:00
Neil Alexander
9e4d169208
Set interface IP and MTU on BSD
2018-03-01 13:37:05 +00:00
Neil Alexander
f8dda26dba
Add BSD support (openbsd, freebsd, solaris)
2018-03-01 11:49:49 +00:00
Neil Alexander
ebc4eacee4
Allow sane defaults on setTunTap
2018-02-28 15:27:58 +00:00
Neil Alexander
fdd32b9571
Add setTunTap
2018-02-28 15:15:57 +00:00
Neil Alexander
2b48fd1fce
Add addPeer to admin socket
2018-02-28 13:43:06 +00:00
Arceliar
ddc4773b19
don't drop send/recv traffic going through the crypto workers, just block until they're free (TODO run further tests to make sure this doesn't cycle/deadlock)
2018-02-26 18:12:28 -06:00
Arceliar
63b55cda62
Mostly working PMTU discovery when going over UDP links
2018-02-25 20:24:36 -06:00
Arceliar
0470f6f1c1
cleanup
2018-02-23 13:04:52 -06:00
Arceliar
bb3ae8b39b
temporarily limit PMTU to 2048, as a workaround to some pathelogical behavior where a TCP stream carried over a UDP peer can throttle down to 0 in the presence of significant packet loss
2018-02-23 12:46:22 -06:00
Arceliar
d3dc7765f2
trying to debug UDP+large MTU issues
2018-02-20 17:31:12 -06:00
Arceliar
a81c361484
tcp reconnect bufix, test with bufio, and switch back to tcp auto-peering by default to continue testing
2018-02-19 23:22:36 -06:00
Arceliar
a21a039b57
remove unused field from peer
2018-02-19 19:47:11 -06:00
Arceliar
4045597516
Use larger UDP chunks for link-local IP and let the OS fragment it. Switch to UDP for link-local peers. Minor code cleanup for TCP.
2018-02-19 19:34:51 -06:00
Arceliar
71150fcb86
ignore root tstamp updates if we just updated, to throttle the rate at which updates (and new signatures) can propagate
2018-02-17 23:57:24 -06:00
Arceliar
a66a29779a
Slightly nicer way to throttle peer announcements
2018-02-17 23:41:42 -06:00
Arceliar
0fc7401635
check root before adding peers to the switch lookupTable, instead of during each lookup
2018-02-17 23:14:23 -06:00
Arceliar
430d49d8a4
send fewer link announcements, fix a ttl encoding bug, and remove unnecessary key field from the wire format for dht req/res
2018-02-17 21:59:08 -06:00
Arceliar
8ba11b86bb
remove duplicate tcp connections
2018-02-17 20:44:23 -06:00
Arceliar
25f00c1c7a
disable keys in link protocol traffic, since these are already known, *breaks backwards compat*
2018-02-17 20:30:59 -06:00
Arceliar
da44ec282f
Add a rumor mill to throttle dht maintenance traffic
2018-02-17 17:10:08 -06:00
Neil Alexander
02473158d4
Allow setting IfName to 'none' to run without TUN/TAP
2018-02-15 22:29:13 +00:00
Neil Alexander
366d2af1d3
Fix first queued packet on session pcreation
2018-02-15 18:02:08 +00:00
Neil Alexander
1c59338f01
Fix checksums and packet buffers, sends ICMPv6 Packet Too Big messages successfully now
2018-02-15 13:38:54 +00:00
Neil Alexander
37e4492b86
Send ICMPv6 response to packets larger than session MTU (WIP: checksum wrong?)
2018-02-14 22:59:24 +00:00
Arceliar
a3a9696880
Merge pull request #14 from neilalexander/icmpv6
...
Replace ndp.go with icmpv6.go
2018-02-14 11:16:24 -06:00
Neil Alexander
844212e95b
Highlight packets that exceed the agreed session MTU
2018-02-14 14:08:40 +00:00
Neil Alexander
34b264067e
Run gofmt -s -w .
2018-02-14 11:46:10 +00:00
Neil Alexander
0bf43b758f
Split create_icmpv6 into create_icmpv6_tun and create_icmpv6_tap
2018-02-14 11:39:55 +00:00
Neil Alexander
d78e0f7067
Improve icmpv6.go
...
- Now doesn't use unsafe
- Much cleaner
- Doesn't run in a goroutine perpetually
- Has a function to create ICMPv6 packets
2018-02-14 11:23:46 +00:00
Neil Alexander
6571a8c300
Don't use channels for ICMPv6 packets
2018-02-12 20:00:55 +00:00
Neil Alexander
fac4bf796e
Add some error handling and other fixes to icmpv6.go
2018-02-12 19:40:13 +00:00
Neil Alexander
be0d6feeba
Remove ndp.go and add icmpv6.go
2018-02-12 18:19:31 +00:00
Neil Alexander
7a0b48ffb3
Clean up session.go
2018-02-12 00:01:15 +00:00
Neil Alexander
11a7c5c458
Exchange MTU on wire
2018-02-11 23:58:30 +00:00
Neil Alexander
536974f20c
Try to exchange MTUs when creating sessions
2018-02-11 23:09:05 +00:00
Neil Alexander
e9bd98d213
Add "IfTAPMode" configuration option to allow selecting TAP mode on supported platforms
2018-02-11 21:45:44 +00:00
Arceliar
d424489329
add tcp support and use it by default
2018-02-09 17:42:55 -06:00
Arceliar
4acce71468
Merge branch 'master' into bigmtu
2018-02-07 17:49:04 -06:00
Arceliar
e9adf327b0
possibly fix deadlock from race in peer linkloop goroutine, add some related debug code to the admin
2018-02-07 17:48:30 -06:00
Arceliar
b704d7b497
change mtu and enable udp chunking
2018-02-04 11:25:20 -06:00
Arceliar
63aadf6e88
use smaller buffer sizes for buffered channels
2018-02-03 18:44:28 -06:00
Arceliar
2dd8152a0c
reorganize and add more to the admin
2018-01-29 18:48:14 -06:00
Arceliar
c18d863a3e
update comments, mostly TODO/FIXME notes
2018-01-26 17:30:51 -06:00
Neil Alexander
e44f64bea0
Fix MTU issues with TAP adapters
2018-01-25 17:44:56 +00:00
Arceliar
d52fab8af6
disable/enable the tap device at startup to clear any old settings, e.g. old addresses
2018-01-24 21:14:26 -06:00
Arceliar
06e3c8c997
if you could go ahead and include your port number in your multicast announcements, that'd be great
2018-01-24 18:45:29 -06:00
Neil Alexander
761e7cdeb0
Remove apparently excessive escaping from netsh in tun_windows.go
2018-01-24 22:37:08 +00:00
Neil Alexander
ff55070458
TAP support added
...
- Supports Windows using OpenVPN NDIS 6 TAP driver
- Supports NDP Neighbor Solicitation and Advertisements in ndp.go
- Supports TAP encapsulation and decapsulation in tun.go
2018-01-24 10:59:01 +00:00
Arceliar
2b7c6eafcd
In admin dot, reverse direction of peer links, include the switch port for each link, and sort the output by coords
2018-01-21 16:19:39 -06:00
Neil Alexander
36f9cc5041
Highlight own node on dot graph
2018-01-21 21:54:50 +00:00
Arceliar
87a4af7841
update admin dot to better handle missing nodes and to direct links towards parent, based on neilalexander's work
2018-01-21 14:58:54 -06:00
Arceliar
625b97c511
add and use a thread-safe way of reading router internal state, and include active sessions in the admin query
2018-01-21 12:55:45 -06:00
Neil Alexander
8ef852469b
Formatting
2018-01-21 17:53:25 +00:00
Neil Alexander
483d90a728
Draw dot draphs (although maybe not very well)
2018-01-21 17:51:51 +00:00
Neil Alexander
c4ac0a90ac
Add the ability to see switch ports and DHT
2018-01-21 12:57:54 +00:00
Neil Alexander
b754d68068
Add an admin socket
2018-01-21 00:17:15 +00:00
Arceliar
502ab3cfaa
check that the source IP inside a packet matches the address or prefix for the session that transmitted it
2018-01-19 17:33:04 -06:00
Arceliar
f929df1ea9
minor performance adjustments
2018-01-18 18:48:34 -06:00
Neil Alexander
62c45e7cc7
Use MTU from interface definition
2018-01-15 14:39:07 +00:00
Neil Alexander
d7be706413
Move to unix.Syscall etc and tidy up
2018-01-15 14:35:37 +00:00
Neil Alexander
5d2dd061f0
Fix definition of SIOCAIFADDR_IN6
2018-01-15 14:14:18 +00:00
Neil Alexander
8e86c4b853
Merge /Users/neilalexander/Desktop/Projects/yggdrasil-go into macos-interface
2018-01-15 11:22:54 +00:00
Arceliar
75965b6da4
Switch connAddr (udp map key) from string to a struct that allocates less. Reduce some other allocations. Use larger channel buffers to reduce backpressure from runtime jitter.
2018-01-13 07:26:26 -06:00
Arceliar
ef1e0c902f
Add regexp to limit which link-local IPv6 zones allow peering, and check that a peer isn't from within the networks address block (prevents accidental tunneling)
2018-01-09 02:08:54 -06:00
Neil Alexander
d69190715f
Added a darwin tun module. It should work, but it doesn't!
2018-01-06 16:39:30 +00:00
Neil Alexander
c3600d14d6
Implement a tun interface to reduce dependency on Water library
2018-01-05 23:35:59 +00:00
Neil Alexander
b3ebe76b59
Run gofmt -s -w .
2018-01-04 22:37:51 +00:00
Neil Alexander
ae7b07ae6a
Move Linux-specific ifname logic to tun_linux.go and place a generic in tun_other.go
2018-01-04 22:34:17 +00:00
Neil Alexander
1c799b305d
Add support for specifying tun device name
2018-01-04 13:31:48 +00:00
Arceliar
e5d526881d
Disable tun panic on IPv4 packets and add a link to a Vyatta router config
2018-01-03 15:27:13 -06:00
Arceliar
82fd435211
Avoid sending unnecessairy udp key packets, and try config peers less often
2018-01-02 18:45:09 -06:00
Arceliar
d7e6d814a0
first code/readme/license commit
2017-12-28 22:16:20 -06:00
