Arceliar
|
8cf8b0ec41
|
fix bug in recvPacket for packets coming from a subnet
|
2018-11-11 00:00:47 -06:00 |
|
Arceliar
|
3b8cd0a8d6
|
Merge pull request #205 from Arceliar/tunfix
fix crash when starting in tun mode
|
2018-11-10 22:44:02 -06:00 |
|
Arceliar
|
1b1b776097
|
fix crash when starting in tun mode
|
2018-11-10 22:39:15 -06:00 |
|
Neil Alexander
|
b3887e554c
|
Merge pull request #204 from neilalexander/tapmac
Neighbor discovery changes for TAP mode
|
2018-11-10 19:41:50 +00:00 |
|
Neil Alexander
|
6fab0e9507
|
Fix CKR (IPv4/IPv6) in TAP mode so frames sent to node MAC, base MAC/LL from node IPv6 address
|
2018-11-10 18:33:52 +00:00 |
|
Neil Alexander
|
adc32fe92f
|
Track further neighbor state, don't send more NDPs than needed
|
2018-11-10 17:32:03 +00:00 |
|
Neil Alexander
|
d50e1bc803
|
More complete NDP implementation for TAP mode, which tracks individual MAC addresses for neighbors
|
2018-11-10 15:46:10 +00:00 |
|
Arceliar
|
15d5b3f82c
|
comments and minor cleanup
|
2018-11-09 23:02:38 -06:00 |
|
Arceliar
|
7af85c7d70
|
Merge pull request #201 from neilalexander/ckr
Tunnel traffic using crypto-key routing
|
2018-11-09 18:37:39 -06:00 |
|
Neil Alexander
|
685b565512
|
Check IP header lengths correctly per protocol
|
2018-11-07 10:29:08 +00:00 |
|
Neil Alexander
|
9542bfa902
|
Check the session perm pub key against the CKR key
|
2018-11-07 10:16:46 +00:00 |
|
Neil Alexander
|
fbfae473d4
|
Use full node ID for CKR routes instead of truncated node IDs from the address/subnet
|
2018-11-07 10:04:31 +00:00 |
|
Neil Alexander
|
39dab53ac7
|
Update comments in configuration and some godoc descriptions
|
2018-11-06 22:57:53 +00:00 |
|
Neil Alexander
|
a3a53f92c3
|
Reinstate length/bounds check in tun.go
|
2018-11-06 22:35:28 +00:00 |
|
Neil Alexander
|
0240375417
|
IPv4 CKR support in router
|
2018-11-06 20:49:19 +00:00 |
|
Neil Alexander
|
424faa1c51
|
Support IPv4 in ckr.go
|
2018-11-06 20:04:49 +00:00 |
|
Neil Alexander
|
cb7a5f17d9
|
Check destination address upon receive in router
|
2018-11-06 19:23:20 +00:00 |
|
Neil Alexander
|
2f75075da3
|
Fix Yggdrasil subnet routing
|
2018-11-06 14:28:57 +00:00 |
|
Neil Alexander
|
bc62af7f7d
|
Enable CKR properly from config
|
2018-11-06 12:32:16 +00:00 |
|
Neil Alexander
|
bc578f571c
|
Some output at startup
|
2018-11-06 11:56:32 +00:00 |
|
Neil Alexander
|
f0947223bb
|
Only validate CKR routes if CKR enabled
|
2018-11-06 11:11:57 +00:00 |
|
Neil Alexander
|
19e6aaf9f5
|
Remove sourceSubnet from router
|
2018-11-06 00:06:37 +00:00 |
|
Neil Alexander
|
e3d4aed44a
|
Configure IPv6Sources
|
2018-11-06 00:05:01 +00:00 |
|
Neil Alexander
|
8c2327a2bf
|
Add source addresses option and more intelligent source checking
|
2018-11-05 23:59:41 +00:00 |
|
Neil Alexander
|
cfdbc481a5
|
Modify source address check for CKR
|
2018-11-05 23:22:45 +00:00 |
|
Neil Alexander
|
7218b5a56c
|
Don't look up public keys for Yggdrasil native addresses
|
2018-11-05 23:12:26 +00:00 |
|
Neil Alexander
|
c7f2427de1
|
Check CKR routes when receiving packets in router
|
2018-11-05 22:58:58 +00:00 |
|
Neil Alexander
|
87b0f5fe24
|
Use CKR in router when sending packets
|
2018-11-05 22:39:30 +00:00 |
|
Neil Alexander
|
295e9c9a10
|
Cache crypto-key routes (until routing table changes)
|
2018-11-05 17:31:10 +00:00 |
|
Neil Alexander
|
ec751e8cc7
|
Don't allow Yggdrasil ranges as crypto-key routes
|
2018-11-05 17:03:58 +00:00 |
|
Neil Alexander
|
52206dc381
|
Add initial crypto-key routing handlers
|
2018-11-05 16:40:47 +00:00 |
|
Arceliar
|
a008b42f99
|
cleanup and some bugfixes, cache important dht nodes until something gets added/removed
|
2018-10-29 22:24:18 -05:00 |
|
Arceliar
|
671c7f2a47
|
don't update recv time for known nodes that ping us or known peers
|
2018-10-28 15:04:44 -05:00 |
|
Arceliar
|
c0531627bc
|
fix some chord dht bootstrapping bugs, no known cases where it now fails
|
2018-10-24 22:03:27 -05:00 |
|
Neil Alexander
|
f088a244da
|
Merge pull request #198 from neilalexander/endpoints
Show real endpoints in getPeers etc
|
2018-10-24 18:28:51 +01:00 |
|
Arceliar
|
253861ebd3
|
reverse dht ownership order from predecessor to successor, this plays nicer with the default 0 bits in unknown node IDs
|
2018-10-21 18:15:04 -05:00 |
|
Arceliar
|
5e3959f1d0
|
yet more debugging
|
2018-10-21 17:40:43 -05:00 |
|
Neil Alexander
|
20c4b7027a
|
Fix merge conflicts with endpoints branch
|
2018-10-21 23:24:29 +01:00 |
|
Neil Alexander
|
aab0502a4a
|
Remove friendlyname traces, preserve endpoints
|
2018-10-21 23:20:14 +01:00 |
|
Neil Alexander
|
a1b72c16d8
|
Some attempt at exchanging session metadata over the wire (broken)
|
2018-10-21 22:58:27 +01:00 |
|
Arceliar
|
f0bd40ff68
|
more testing
|
2018-10-21 15:10:18 -05:00 |
|
Arceliar
|
bcbd24120d
|
keep track of all keys we're supposed to care about in the dht, don't give special treatment to successors/predecessors
|
2018-10-21 14:57:04 -05:00 |
|
Arceliar
|
efe6cec11a
|
more debugging, trying to understand bootstrap issues
|
2018-10-21 12:28:21 -05:00 |
|
Neil Alexander
|
4f435705e3
|
Fix getSelf in yggdrasilctl
|
2018-10-21 18:06:54 +01:00 |
|
Neil Alexander
|
088d28a93b
|
Fix debug builds with friendly names
|
2018-10-21 18:04:02 +01:00 |
|
Neil Alexander
|
b809adf981
|
Add FriendlyName option, show friendly name and real endpoint in admin socket/yggdrasilctl
|
2018-10-21 17:57:48 +01:00 |
|
Arceliar
|
6c59ae862a
|
more debugging
|
2018-10-21 00:05:04 -05:00 |
|
Arceliar
|
95201669fe
|
reintroduce (better) dht throttling
|
2018-10-20 22:06:36 -05:00 |
|
Arceliar
|
8825494d59
|
remove maintenance searches and throttle logic, to focus on debugging in this simpler case first
|
2018-10-20 20:11:32 -05:00 |
|
Arceliar
|
3dbffae99f
|
add search for successor, via parent, to the dht maintenance cycle
|
2018-10-20 19:09:25 -05:00 |
|