yggdrasil-go/CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[0.4.5] - 2022-10-15

Added

• Support for peering over UNIX sockets is now available, by configuring Listen and peering URIs in the unix:///path/to/socket.sock format

Changed

• yggdrasilctl has been refactored and now has cleaner output
• It is now possible to addPeer and removePeer using the admin socket again
• The getSessions admin socket call reports number of bytes received and transmitted again
• The link setup code has been refactored, making it easier to support new peering types in the future
• Yggdrasil now maintains configuration internally, rather than relying on a shared and potentially mutable structure

Fixed

• Tracking information about expired root nodes has been fixed, which should hopefully resolve issues with reparenting and connection failures when the root node disappears
• A bug in the mobile framework code which caused a crash on Android when multicast failed to set up has been fixed
• Yggdrasil should now shut down gracefully and clean up correctly when running as a Windows service

[0.4.4] - 2022-07-07

Fixed

• ICMPv6 "Packet Too Big" payload size has been increased, which should fix Path MTU Discovery (PMTUD) when two nodes have different IfMTU values configured
• A crash has been fixed when handling debug packet responses
• yggdrasilctl getSelf should now report coordinates correctly again

Changed

• Go 1.17 is now required to build Yggdrasil

[0.4.3] - 2022-02-06

Added

• bytes_sent, bytes_recvd and uptime have been added to getPeers
• Clearer logging when connections are rejected due to incompatible peer versions

Fixed

• Latency-based parent selection tiebreak is now reliable on platforms even with low timer resolution
• Tree distance calculation offsets have been corrected

[0.4.2] - 2021-11-03

Fixed

• Reverted a dependency update which resulted in problems building with Go 1.16 and running on Windows

[0.4.1] - 2021-11-03

Added

• TLS peerings now support Server Name Indication (SNI)
  • The SNI is sent automatically if the peering URI contains a DNS name
  • A custom SNI can be specified by adding the ?sni=domain.com parameter to the peering URI
• A new ipv6rwc API package now implements the IPv6-specific logic separate from the tun package

Fixed

• A crash when calculating the partial public key for very high IPv6 addresses has been fixed
• A crash due to a concurrent map write has been fixed
• A crash due to missing TUN configuration has been fixed
• A race condition in the keystore code has been fixed

[0.4.0] - 2021-07-04

Added

• New routing scheme, which is backwards incompatible with previous versions of Yggdrasil
  • The wire protocol version number, exchanged as part of the peer setup handshake, has been increased to 0.4
  • Nodes running this new version will not be able to peer with earlier versions of Yggdrasil
  • Please note that the network may be temporarily unstable while infrastructure is being upgraded to the new release
• TLS connections now use public key pinning
  • If no public key was already pinned, then the public key received as part of the TLS handshake is pinned to the connection
  • The public key received as part of the handshake is checked against the pinned keys, and if no match is found, the connection is rejected

Changed

• IP addresses are now derived from ed25519 public (signing) keys
  • Previously, addresses were derived from a hash of X25519 (Diffie-Hellman) keys
  • Importantly, this means that all internal IPv6 addresses will change with this release — this will affect anyone running public services or relying on Yggdrasil for remote access
• It is now recommended to peer over TLS
  • Link-local peers from multicast peer discovery will now connect over TLS, with the key from the multicast beacon pinned to the connection
  • socks:// peers now expect the destination endpoint to be a tls:// listener, instead of a tcp:// listener
• Multicast peer discovery is now more configurable
  • There are separate configuration options to control if beacons are sent, what port to listen on for incoming connections (if sending beacons), and whether or not to listen for beacons from other nodes (and open connections when receiving a beacon)
  • Each configuration entry in the list specifies a regular expression to match against interface names
  • If an interface matches multiple regex in the list, it will use the settings for the first entry in the list that it matches with
• The session and routing code has been entirely redesigned and rewritten
  • This is still an early work-in-progress, so the code hasn't been as well tested or optimized as the old code base — please bear with us for these next few releases as we work through any bugs or issues
  • Generally speaking, we expect to see reduced bandwidth use and improved reliability with the new design, especially in cases where nodes move around or change peerings frequently
  • Cryptographic sessions no longer use a single shared (ephemeral) secret for the entire life of the session. Keys are now rotated regularly for ongoing sessions (currently rotated at least once per round trip exchange of traffic, subject to change in future releases)
  • Source routing has been added. Under normal circumstances, this is what is used to forward session traffic (e.g. the user's IPv6 traffic)
  • DHT-based routing has been added. This is used when the sender does not know a source route to the destination. Forwarding through the DHT is less efficient, but the only information that it requires the sender to know is the destination node's (static) key. This is primarily used during the key exchange at session setup, or as a temporary fallback when a source route fails due to changes in the network
  • The new DHT design is no longer RPC-based, does not support crawling and does not inherently allow nodes to look up the owner of an arbitrary key. Responding to lookups is now implemented at the application level and a response is only sent if the destination key matches the node's /128 IP or /64 prefix
  • The greedy routing scheme, used to forward all traffic in previous releases, is now only used for protocol traffic (i.e. DHT setup and source route discovery)
  • The routing logic now lives in a standalone library. You are encouraged not to use it, as it's still considered pre-alpha, but it's available for those who want to experiment with the new routing algorithm in other contexts
  • Session MTUs may be slightly lower now, in order to accommodate large packet headers if required
• Many of the admin functions available over yggdrasilctl have been changed or removed as part of rewrites to the code
  • Several remote debug functions have been added temporarily, to allow for crawling and census gathering during the transition to the new version, but we intend to remove this at some point in the (possibly distant) future
  • The list of available functions will likely be expanded in future releases
• The configuration file format has been updated in response to the changed/removed features

Removed

• Tunnel routing (a.k.a. crypto-key routing or "CKR") has been removed
  • It was far too easy to accidentally break routing altogether by capturing the route to peers with the TUN adapter
  • We recommend tunnelling an existing standard over Yggdrasil instead (e.g. ip6gre, ip6gretap or other similar encapsulations, using Yggdrasil IPv6 addresses as the tunnel endpoints)
  • All TunnelRouting configuration options will no longer take effect
• Session firewall has been removed
  • This was never a true firewall — it didn't behave like a stateful IP firewall, often allowed return traffic unexpectedly and was simply a way to prevent a node from being flooded with unwanted sessions, so the name could be misleading and usually lead to a false sense of security
  • Due to design changes, the new code needs to address the possible memory exhaustion attacks in other ways and a single configurable list no longer makes sense
  • Users who want a firewall or other packet filter mechansim should configure something supported by their OS instead (e.g. ip6tables)
  • All SessionFirewall configuration options will no longer take effect
• SIGHUP handling to reload the configuration at runtime has been removed
  • It was not obvious which parts of the configuration could be reloaded at runtime, and which required the application to be killed and restarted to take effect
  • Reloading the config without restarting was also a delicate and bug-prone process, and was distracting from more important developments
  • SIGHUP will be handled normally (i.e. by exiting)
• cmd/yggrasilsim has been removed, and is unlikely to return to this repository

[0.3.16] - 2021-03-18

Added

• New simulation code under cmd/yggdrasilsim (work-in-progress)

Changed

• Multi-threading in the switch
  • Swich lookups happen independently for each (incoming) peer connection, instead of being funneled to a single dedicated switch worker
  • Packets are queued for each (outgoing) peer connection, instead of being handled by a single dedicated switch worker
• Queue logic rewritten
  • Heap structure per peer that traffic is routed to, with one FIFO queue per traffic flow
  • The total size of each heap is configured automatically (we basically queue packets until we think we're blocked on a socket write)
  • When adding to a full heap, the oldest packet from the largest queue is dropped
  • Packets are popped from the queue in FIFO order (oldest packet from among all queues in the heap) to prevent packet reordering at the session level
• Removed global sync.Pool of []byte
  • Local sync.Pools are used in the hot loops, but not exported, to avoid memory corruption if libraries are reused by other projects
  • This may increase allocations (and slightly reduce speed in CPU-bound benchmarks) when interacting with the tun/tap device, but traffic forwarded at the switch layer should be unaffected
• Upgrade dependencies
• Upgrade build to Go 1.16

Fixed

• Fixed a bug where the connection listener could exit prematurely due to resoruce exhaustion (if e.g. too many connections were opened)
• Fixed DefaultIfName for OpenBSD (/dev/tun0 -> tun0)
• Fixed an issue where a peer could sometimes never be added to the switch
• Fixed a goroutine leak that could occur if a peer with an open connection continued to spam additional connection attempts

[0.3.15] - 2020-09-27

Added

• Support for pinning remote public keys in peering strings has been added, e.g.
  • By signing public key: tcp://host:port?ed25519=key
  • By encryption public key: tcp://host:port?curve25519=key
  • By both: tcp://host:port?ed25519=key&curve25519=key
  • By multiple, in case of DNS round-robin or similar: tcp://host:port?curve25519=key&curve25519=key&ed25519=key&ed25519=key
• Some checks to prevent Yggdrasil-over-Yggdrasil peerings have been added
• Added support for SOCKS proxy authentication, e.g. socks://user@password:host/...

Fixed

• Some bugs in the multicast code that could cause unnecessary CPU usage have been fixed
• A possible multicast deadlock on macOS when enumerating interfaces has been fixed
• A deadlock in the connection code has been fixed
• Updated HJSON dependency that caused some build problems

Changed

• DisconnectPeer and RemovePeer have been separated and implemented properly now
• Less nodes are stored in the DHT now, reducing ambient network traffic and possible instability
• Default config file for FreeBSD is now at /usr/local/etc/yggdrasil.conf instead of /etc/yggdrasil.conf

[0.3.14] - 2020-03-28

Fixed

• Fixes a memory leak that may occur if packets are incorrectly never removed from a switch queue

Changed

• Make DHT searches a bit more reliable by tracking the 16 most recently visited nodes

[0.3.13] - 2020-02-21

Added

• Support for the Wireguard TUN driver, which now replaces Water and provides far better support and performance on Windows
• Windows .msi installer files are now supported (bundling the Wireguard TUN driver)
• NodeInfo code is now actorised, should be more reliable
• The DHT now tries to store the two closest nodes in either direction instead of one, such that if a node goes offline, the replacement is already known
• The Yggdrasil API now supports dialing a remote node using the public key instead of the Node ID

Changed

• The -loglevel command line parameter is now cumulative and automatically includes all levels below the one specified
• DHT search code has been significantly simplified and processes rumoured nodes in parallel, speeding up search time
• DHT search results are now sorted
• The systemd service now handles configuration generation in a different unit
• The Yggdrasil API now returns public keys instead of node IDs when querying for local and remote addresses

Fixed

• The multicast code no longer panics when shutting down the node
• A potential OOB error when calculating IPv4 flow labels (when tunnel routing is enabled) has been fixed
• A bug resulting in incorrect idle notifications in the switch should now be fixed
• MTUs are now using a common datatype throughout the codebase

Removed

• TAP mode has been removed entirely, since it is no longer supported with the Wireguard TUN package. Please note that if you are using TAP mode, you may need to revise your config!
• NetBSD support has been removed until the Wireguard TUN package supports NetBSD

[0.3.12] - 2019-11-24

Added

• New API functions SetMaximumSessionMTU and GetMaximumSessionMTU
• New command line parameters -address and -subnet for getting the address/subnet from the config file, for use with -useconffile or -useconf
• A warning is now produced in the Yggdrasil output at startup when the MTU in the config is invalid or has been adjusted for some reason

Changed

• On Linux, outgoing InterfacePeers connections now use SO_BINDTODEVICE to prefer an outgoing interface
• The genkeys utility is now in cmd rather than misc

Fixed

• A data race condition has been fixed when updating session coordinates
• A crash when shutting down when no multicast interfaces are configured has been fixed
• A deadlock when calling AddPeer multiple times has been fixed
• A typo in the systemd unit file (for some Linux packages) has been fixed
• The NodeInfo and admin socket now report unknown correctly when no build name/version is available in the environment at build time
• The MTU calculation now correctly accounts for ethernet headers when running in TAP mode

[0.3.11] - 2019-10-25

Added

• Support for TLS listeners and peers has been added, allowing the use of tls://host:port in Peers, InterfacePeers and Listen configuration settings - this allows hiding Yggdrasil peerings inside regular TLS connections

Changed

• Go 1.13 or later is now required for building Yggdrasil
• Some exported API functions have been updated to work with standard Go interfaces:
  • net.Conn instead of yggdrasil.Conn
  • net.Dialer (the interface it would satisfy if it wasn't a concrete type) instead of yggdrasil.Dialer
  • net.Listener instead of yggdrasil.Listener
• Session metadata is now updated correctly when a search completes for a node to which we already have an open session
• Multicast module reloading behaviour has been improved

Fixed

• An incorrectly held mutex in the crypto-key routing code has been fixed
• Multicast module no longer opens a listener socket if no multicast interfaces are configured

[0.3.10] - 2019-10-10

Added

• The core library now includes several unit tests for peering and yggdrasil.Conn connections

Changed

• On recent Linux kernels, Yggdrasil will now set the tcp_congestion_control algorithm used for its own TCP sockets to BBR, which reduces latency under load
• The systemd service configuration in contrib (and, by extension, some of our packages) now attempts to load the tun module, in case TUN/TAP support is available but not loaded, and it restricts Yggdrasil to the CAP_NET_ADMIN capability for managing the TUN/TAP adapter, rather than letting it do whatever the (typically root) user can do

Fixed

• The yggdrasil.Conn.RemoteAddr() function no longer blocks, fixing a deadlock when CKR is used while under heavy load

[0.3.9] - 2019-09-27

Added

• Yggdrasil will now complain more verbosely when a peer URI is incorrectly formatted
• Soft-shutdown methods have been added, allowing a node to shut down gracefully when terminated
• New multicast interval logic which sends multicast beacons more often when Yggdrasil is first started to increase the chance of finding nearby nodes quickly after startup

Changed

• The switch now buffers packets more eagerly in an attempt to give the best link a chance to send, which appears to reduce packet reordering when crossing aggregate sets of peerings
• Substantial amounts of the codebase have been refactored to use the actor model, which should substantially reduce the chance of deadlocks
• Nonce tracking in sessions has been modified so that memory usage is reduced whilst still only allowing duplicate packets within a small window
• Soft-reconfiguration support has been simplified using new actor functions
• The garbage collector threshold has been adjusted for mobile builds
• The maximum queue size is now managed exclusively by the switch rather than by the core

Fixed

• The broken hjson-go dependency which affected builds of the previous version has now been resolved in the module manifest
• Some minor memory leaks in the switch have been fixed, which improves memory usage on mobile builds
• A memory leak in the add-peer loop has been fixed
• The admin socket now reports the correct URI strings for SOCKS peers in getPeers
• A race condition when dialing a remote node by both the node address and routed prefix simultaneously has been fixed
• A race condition between the router and the dial code resulting in a panic has been fixed
• A panic which could occur when the TUN/TAP interface disappears (e.g. during soft-shutdown) has been fixed
• A bug in the semantic versioning script which accompanies Yggdrasil for builds has been fixed
• A panic which could occur when the TUN/TAP interface reads an undersized/corrupted packet has been fixed

Removed

• A number of legacy debug functions have now been removed and a number of exported API functions are now better documented

[0.3.8] - 2019-08-21

Changed

• Yggdrasil can now send multiple packets from the switch at once, which results in improved throughput with smaller packets or lower MTUs
• Performance has been slightly improved by not allocating cancellations where not necessary
• Crypto-key routing options have been renamed for clarity
  • IPv4Sources is now named IPv4LocalSubnets
  • IPv6Sources is now named IPv6LocalSubnets
  • IPv4Destinations is now named IPv4RemoteSubnets
  • IPv6Destinations is now named IPv6RemoteSubnets
  • The old option names will continue to be accepted by the configuration parser for now but may not be indefinitely
• When presented with multiple paths between two nodes, the switch now prefers the most recently used port when possible instead of the least recently used, helping to reduce packet reordering
• New nonce tracking should help to reduce the number of packets dropped as a result of multiple/aggregate paths or congestion control in the switch

Fixed

• A deadlock was fixed in the session code which could result in Yggdrasil failing to pass traffic after some time

Security

• Address verification was not strict enough, which could result in a malicious session sending traffic with unexpected or spoofed source or destination addresses which Yggdrasil could fail to reject
  • Versions 0.3.6 and 0.3.7 are vulnerable - users of these versions should upgrade as soon as possible
  • Versions 0.3.5 and earlier are not affected

[0.3.7] - 2019-08-14

Changed

• The switch should now forward packets along a single path more consistently in cases where congestion is low and multiple equal-length paths exist, which should improve stability and result in fewer out-of-order packets
• Sessions should now be more tolerant of out-of-order packets, by replacing a bitmask with a variable sized heap+map structure to track recently received nonces, which should reduce the number of packets dropped due to reordering when multiple paths are used or multiple independent flows are transmitted through the same session
• The admin socket can no longer return a dotfile representation of the known parts of the network, this could be rebuilt by clients using information from getSwitchPeers,getDHT and getSessions

Fixed

• A number of significant performance regressions introduced in version 0.3.6 have been fixed, resulting in better performance
• Flow labels are now used to prioritise traffic flows again correctly
• In low-traffic scenarios where there are multiple peerings between a pair of nodes, Yggdrasil now prefers the most active peering instead of the least active, helping to reduce packet reordering
• The Listen statement, when configured as a string rather than an array, will now be parsed correctly
• The admin socket now returns coords as a correct array of unsigned 64-bit integers, rather than the internal representation
• The admin socket now returns box_pub_key in string format again
• Sessions no longer leak/block when no listener (e.g. TUN/TAP) is configured
• Incoming session connections no longer block when a session already exists, which results in less leaked goroutines
• Flooded sessions will no longer block other sessions
• Searches are now cleaned up properly and a couple of edge-cases with duplicate searches have been fixed
• A number of minor allocation and pointer fixes

[0.3.6] - 2019-08-03

Added

• Yggdrasil now has a public API with interfaces such as yggdrasil.ConnDialer, yggdrasil.ConnListener and yggdrasil.Conn for using Yggdrasil as a transport directly within applications
• Session gatekeeper functions, part of the API, which can be used to control whether to allow or reject incoming or outgoing sessions dynamically (compared to the previous fixed whitelist/blacklist approach)
• Support for logging to files or syslog (where supported)
• Platform defaults now include the ability to set sane defaults for multicast interfaces

Changed

• Following a massive refactoring exercise, Yggdrasil's codebase has now been broken out into modules
• Core node functionality in the yggdrasil package with a public API
  • This allows Yggdrasil to be integrated directly into other applications and used as a transport
  • IP-specific code has now been moved out of the core yggdrasil package, making Yggdrasil effectively protocol-agnostic
• Multicast peer discovery functionality is now in the multicast package
• Admin socket functionality is now in the admin package and uses the Yggdrasil public API
• TUN/TAP, ICMPv6 and all IP-specific functionality is now in the tuntap package
• PPROF debug output is now sent to stderr instead of stdout
• Node IPv6 addresses on macOS are now configured as secured
• Upstream dependency references have been updated, which includes a number of fixes in the Water library

Fixed

• Multicast discovery is no longer disabled if the nominated interfaces aren't available on the system yet, e.g. during boot
• Multicast interfaces are now re-evaluated more frequently so that Yggdrasil doesn't need to be restarted to use interfaces that have become available since startup
• Admin socket error cases are now handled better
• Various fixes in the TUN/TAP module, particularly surrounding Windows platform support
• Invalid keys will now cause the node to fail to start, rather than starting but silently not working as before
• Session MTUs are now always calculated correctly, in some cases they were incorrectly defaulting to 1280 before
• Multiple searches now don't take place for a single connection
• Concurrency bugs fixed
• Fixed a number of bugs in the ICMPv6 neighbor solicitation in the TUN/TAP code
• A case where peers weren't always added correctly if one or more peers were unreachable has been fixed
• Searches which include the local node are now handled correctly
• Lots of small bug tweaks and clean-ups throughout the codebase

[0.3.5] - 2019-03-13

Fixed

• The AllowedEncryptionPublicKeys option has now been fixed to handle incoming connections properly and no longer blocks outgoing connections (this was broken in v0.3.4)
• Multicast TCP listeners will now be stopped correctly when the link-local address on the interface changes or disappears altogether

[0.3.4] - 2019-03-12

Added

• Support for multiple listeners (although currently only TCP listeners are supported)
• New multicast behaviour where each multicast interface is given its own link-local listener and does not depend on the Listen configuration
• Blocking detection in the switch to avoid parenting a blocked peer
• Support for adding and removing listeners and multicast interfaces when reloading configuration during runtime
• Yggdrasil will now attempt to clean up UNIX admin sockets on startup if left behind by a previous crash
• Admin socket getTunnelRouting and setTunnelRouting calls for enabling and disabling crypto-key routing during runtime
• On macOS, Yggdrasil will now try to wake up AWDL on start-up when awdl0 is a configured multicast interface, to keep it awake after system sleep, and to stop waking it when no longer needed
• Added LinkLocalTCPPort option for controlling the port number that link-local TCP listeners will listen on by default when setting up MulticastInterfaces (a node restart is currently required for changes to LinkLocalTCPPort to take effect - it cannot be updated by reloading config during runtime)

Changed

• The Listen configuration statement is now an array instead of a string
• The Listen configuration statement should now conform to the same formatting as peers with the protocol prefix, e.g. tcp://[::]:0
• Session workers are now non-blocking
• Multicast interval is now fixed at every 15 seconds and network interfaces are reevaluated for eligibility on each interval (where before the interval depended upon the number of configured multicast interfaces and evaluation only took place at startup)
• Dead connections are now closed in the link handler as opposed to the switch
• Peer forwarding is now prioritised instead of randomised

Fixed

• Admin socket getTunTap call now returns properly instead of claiming no interface is enabled in all cases
• Handling of getRoutes etc in yggdrasilctl is now working
• Local interface names are no longer leaked in multicast packets
• Link-local TCP connections, particularly those initiated because of multicast beacons, are now always correctly scoped for the target interface
• Yggdrasil now correctly responds to multicast interfaces going up and down during runtime

[0.3.3] - 2019-02-18

Added

• Dynamic reconfiguration, which allows reloading the configuration file to make changes during runtime by sending a SIGHUP signal (note: this only works with -useconffile and not -useconf and currently reconfiguring TUN/TAP is not supported)
• Support for building Yggdrasil as an iOS or Android framework if the appropriate tools (e.g. gomobile/gobind + SDKs) are available
• Connection contexts used for TCP connections which allow more exotic socket options to be set, e.g.
  • Reusing the multicast socket to allow multiple running Yggdrasil instances without having to disable multicast
  • Allowing supported Macs to peer with other nearby Macs that aren't even on the same Wi-Fi network using AWDL
• Flexible logging support, which allows for logging at different levels of verbosity

Changed

• Switch changes to improve parent selection
• Node configuration is now stored centrally, rather than having fragments/copies distributed at startup time
• Significant refactoring in various areas, including for link types (TCP, AWDL etc), generic streams and adapters
• macOS builds through CircleCI are now 64-bit only

Fixed

• Simplified systemd service now in contrib

Removed

• ReadTimeout option is now deprecated

[0.3.2] - 2018-12-26

Added

• The admin socket is now multithreaded, greatly improving performance of the crawler and allowing concurrent lookups to take place
• The ability to hide NodeInfo defaults through either setting the NodeInfoPrivacy option or through setting individual NodeInfo attributes to null

Changed

• The armhf build now targets ARMv6 instead of ARMv7, adding support for Raspberry Pi Zero and other older models, amongst others

Fixed

• DHT entries are now populated using a copy in memory to fix various potential DHT bugs
• DHT traffic should now throttle back exponentially to reduce idle traffic
• Adjust how nodes are inserted into the DHT which should help to reduce some incorrect DHT traffic
• In TAP mode, the NDP target address is now correctly used when populating the peer MAC table. This fixes serious connectivity problems when in TAP mode, particularly on BSD
• In TUN mode, ICMPv6 packets are now ignored whereas they were incorrectly processed before

[0.3.1] - 2018-12-17

Added

• Build name and version is now imprinted onto the binaries if available/specified during build
• Ability to disable admin socket with AdminListen: none
• AF_UNIX domain sockets for the admin socket
• Cache size restriction for crypto-key routes
• NodeInfo support for specifying node information, e.g. node name or contact, which can be used in network crawls or surveys
• getNodeInfo request added to admin socket
• Adds flags -c, -l and -t to build script for specifying GCFLAGS, LDFLAGS or whether to keep symbol/DWARF tables

Changed

• Default AdminListen in newly generated config is now unix:///var/run/yggdrasil.sock
• Formatting of getRoutes in the admin socket has been improved
• Debian package now adds yggdrasil group to assist with AF_UNIX admin socket permissions
• Crypto, address and other utility code refactored into separate Go packages

Fixed

• Switch peer convergence is now much faster again (previously it was taking up to a minute once the peering was established)
• yggdrasilctl is now less prone to crashing when parameters are specified incorrectly
• Panic fixed when Peers or InterfacePeers was commented out

[0.3.0] - 2018-12-12

Added

• Crypto-key routing support for tunnelling both IPv4 and IPv6 over Yggdrasil
• Add advanced SwitchOptions in configuration file for tuning the switch
• Add dhtPing to the admin socket to aid in crawling the network
• New macOS .pkgs built automatically by CircleCI
• Add Dockerfile to repository for Docker support
• Add -json command line flag for generating and normalising configuration in plain JSON instead of HJSON
• Build name and version numbers are now imprinted onto the build, accessible through yggdrasil -version and yggdrasilctl getSelf
• Add ability to disable admin socket by setting AdminListen to "none"
• yggdrasilctl now tries to look for the default configuration file to find AdminListen if -endpoint is not specified
• yggdrasilctl now returns more useful logging in the event of a fatal error

Changed

• Switched to Chord DHT (instead of Kademlia, although still compatible at the protocol level)
• The AdminListen option and yggdrasilctl now default to unix:///var/run/yggdrasil.sock on BSDs, macOS and Linux
• Cleaned up some of the parameter naming in the admin socket
• Latency-based parent selection for the switch instead of uptime-based (should help to avoid high latency links somewhat)
• Real peering endpoints now shown in the admin socket getPeers call to help identify peerings
• Reuse the multicast port on supported platforms so that multiple Yggdrasil processes can run
• yggdrasilctl now has more useful help text (with -help or when no arguments passed)

Fixed

• Memory leaks in the DHT fixed
• Crash fixed where the ICMPv6 NDP goroutine would incorrectly start in TUN mode
• Removing peers from the switch table if they stop sending switch messages but keep the TCP connection alive

[0.2.7] - 2018-10-13

Added

• Session firewall, which makes it possible to control who can open sessions with your node
• Add getSwitchQueues to admin socket
• Add InterfacePeers for configuring static peerings via specific network interfaces
• More output shown in getSwitchPeers
• FreeBSD service script in contrib

Changed

• CircleCI builds are now built with Go 1.11 instead of Go 1.9

Fixed

• Race condition in the switch table, reported by trn
• Debug builds are now tested by CircleCI as well as platform release builds
• Port number fixed on admin graph from unknown nodes

[0.2.6] - 2018-07-31

Added

• Configurable TCP timeouts to assist in peering over Tor/I2P
• Prefer IPv6 flow label when extending coordinates to sort backpressure queues
• arm64 builds through CircleCI

Changed

• Sort dot graph links by integer value

[0.2.5] - 2018-07-19

Changed

• Make yggdrasilctl less case sensitive
• More verbose TCP disconnect messages

Fixed

• Fixed debug builds
• Cap maximum MTU on Linux in TAP mode
• Process successfully-read TCP traffic before checking for / handling errors (fixes EOF behavior)

[0.2.4] - 2018-07-08

Added

• Support for UNIX domain sockets for the admin socket using unix:///path/to/file.sock
• Centralised platform-specific defaults

Changed

• Backpressure tuning, including reducing resource consumption

Fixed

• macOS local ping bug, which previously prevented you from pinging your own utun adapter's IPv6 address

[0.2.3] - 2018-06-29

Added

• Begin keeping changelog (incomplete and possibly inaccurate information before this point).
• Build RPMs in CircleCI using alien. This provides package support for Fedora, Red Hat Enterprise Linux, CentOS and other RPM-based distributions.

Changed

• Local backpressure improvements.
• Change box_pub_key to key in admin API for simplicity.
• Session cleanup.

[0.2.2] - 2018-06-21

Added

• Add yggdrasilconf utility for testing with the vyatta-yggdrasil package.
• Add a randomized retry delay after TCP disconnects, to prevent synchronization livelocks.

Changed

• Update build script to strip by default, which significantly reduces the size of the binary.
• Add debug -d and UPX -u flags to the build script.
• Start pprof in debug builds based on an environment variable (e.g. PPROFLISTEN=localhost:6060), instead of a flag.

Fixed

• Fix typo in big-endian BOM so that both little-endian and big-endian UTF-16 files are detected correctly.

[0.2.1] - 2018-06-15

Changed

• The address range was moved from fd00::/8 to 200::/7. This range was chosen as it is marked as deprecated. The change prevents overlap with other ULA privately assigned ranges.

Fixed

• UTF-16 detection conversion for configuration files, which can particularly be a problem on Windows 10 if a configuration file is generated from within PowerShell.
• Fixes to the Debian package control file.
• Fixes to the launchd service for macOS.
• Fixes to the DHT and switch.

[0.2.0] - 2018-06-13

Added

• Exchange version information during connection setup, to prevent connections with incompatible versions.

Changed

• Wire format changes (backwards incompatible).
• Less maintenance traffic per peer.
• Exponential back-off for DHT maintenance traffic (less maintenance traffic for known good peers).
• Iterative DHT (added sometime between v0.1.0 and here).
• Use local queue sizes for a sort of local-only backpressure routing, instead of the removed bandwidth estimates, when deciding where to send a packet.

Removed

• UDP peering, this may be added again if/when a better implementation appears.
• Per peer bandwidth estimation, as this has been replaced with an early local backpressure implementation.

[0.1.0] - 2018-02-01

Added

• Adopt semantic versioning.

Changed

• Wire format changes (backwards incompatible).
• Many other undocumented changes leading up to this release and before the next one.

[0.0.1] - 2017-12-28

Added

• First commit.
• Initial public release.