cwinfo/yggdrasil-go
5
0
Fork 0
mirror of https://github.com/cwinfo/yggdrasil-go.git synced 2024-11-09 01:10:28 +00:00
Code Releases Activity
e582ac102b
yggdrasil-go/README.md
Neil Alexander e582ac102b
Update README.md
2019-03-13 20:12:08 +00:00

4.0 KiB
Raw Blame History

Yggdrasil

CircleCI

Introduction

Yggdrasil is an early-stage implementation of a fully end-to-end encrypted IPv6 network. It is lightweight, self-arranging, supported on multiple platforms and allows pretty much any IPv6-capable application to communicate securely with other Yggdrasil nodes. Yggdrasil does not require you to have IPv6 Internet connectivity - it also works over IPv4.

Although Yggdrasil shares many similarities with cjdns, it employs a different routing algorithm based on a globally-agreed spanning tree and greedy routing in a metric space, and aims to implement some novel local backpressure routing techniques. In theory, Yggdrasil should scale well on networks with internet-like topologies.

Supported Platforms

We actively support the following platforms, and packages are available for some of the below:

  • Linux
    • .deb and .rpm packages are built by CI for Debian and Red Hat-based distributions
    • Void and Arch packages also available within their respective repositories
  • macOS
    • .pkg packages are built by CI
  • Ubiquiti EdgeOS
    • .deb Vyatta packages are built by CI
  • Windows
  • FreeBSD
  • OpenBSD
  • NetBSD

Please see our Platforms pages for more specific information about each of our supported platforms, including installation steps and caveats.

Building

If you want to build from source, as opposed to installing one of the pre-built packages:

  1. Install Go (requires Go 1.11 or later)
  2. Clone this repository
  3. Run ./build

Note that you can cross-compile for other platforms and architectures by specifying the GOOS and GOARCH environment variables, e.g. GOOS=windows ./build or GOOS=linux GOARCH=mipsle ./build.

Running

Generate configuration

To generate static configuration, either generate a HJSON file (human-friendly, complete with comments):

./yggdrasil -genconf > /path/to/yggdrasil.conf

... or generate a plain JSON file (which is easy to manipulate programmatically):

./yggdrasil -genconf -json > /path/to/yggdrasil.conf

You will need to edit the yggdrasil.conf file to add or remove peers, modify other configuration such as listen addresses or multicast addresses, etc.

Run Yggdrasil

To run with the generated static configuration:

./yggdrasil -useconffile /path/to/yggdrasil.conf

To run in auto-configuration mode (which will use sane defaults and random keys at each startup, instead of using a static configuration file):

./yggdrasil -autoconf

You will likely need to run Yggdrasil as a privileged user or under sudo, unless you have permission to create TUN/TAP adapters. On Linux this can be done by giving the Yggdrasil binary the CAP_NET_ADMIN capability.

Documentation

Documentation is available on our GitHub Pages site, or in the base submodule repository within doc/yggdrasil-network.github.io.

Community

Feel free to join us on our Matrix channel at #yggdrasil:matrix.org or in the #yggdrasil IRC channel on Freenode.

License

This code is released under the terms of the LGPLv3, but with an added exception that was shamelessly taken from godeb. Under certain circumstances, this exception permits distribution of binaries that are (statically or dynamically) linked with this code, without requiring the distribution of Minimal Corresponding Source or Minimal Application Code. For more details, see: LICENSE.