cwinfo/yggdrasil-network.github.io
5
0
Fork 0
mirror of https://github.com/cwinfo/yggdrasil-network.github.io.git synced 2025-02-28 19:51:34 +00:00
Code Releases Activity

Add TunnelRouting options

Browse Source
This commit is contained in:
Neil Alexander 2018-12-09 12:28:42 +00:00
parent ec0dd6f0c5
commit ae2be52601
No known key found for this signature in database
GPG Key ID: A02A2019A2BB0944
1 changed files with 24 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
configuration.md
View File

@ -255,11 +255,30 @@ Note that any field not specified in the configuration will use its default valu
- `BlacklistEncryptionPublicKeys`
- A list of node's `EncryptionPublicKey` keys that are never allowed to communicate with this node under any circumstances, both incoming or outgoing.
- Takes priority over all other options.
- `SwitchOptions`
- Switch options are advanced tuning settings. Ordinarily you should not attempt to change these from their defaults.
- Contains the following configuration options:
- `MaxTotalQueueSize`
- The maximum allowed size, in bytes, of all local switch queues combined. Default is `4194304` (or 4MB).
- `TunnelRouting`
- Crypto-key tunnel routing allows you to tunnel either IPv4 or IPv6 traffic to remote nodes over Yggdrasil. This is similar to using a VPN.
- Contains the following configuration options:
- `Enable`
- Enables crypto-key routing.
- If enabled, the following crypto-key routes will be used by Yggdrasil. If disabled, the below options have no effect.
- `IPv6Destinations`
- A list of routes in the form `{ "aaaa:bbbb:cccc::/e": "EncryptionPublicKey", ... }`
- For each entry, an IPv6 route entry will be created that sends traffic destined for `aaaa:bbbb:cccc::/e` to the node with the specified `EncryptionPublicKey` (effectively your "remote" ranges).
- `IPv6Sources`
- A list of allowed source subnets in the form `[ "aaaa:bbbb:cccc::/e" ]`
- Specifies a list of source IPv6 addresses which are allowed to be sent over the tunnel (essentially your "local" ranges).
- Traffic from the Yggdrasil node's IPv6 address and routed subnet are always allowed.
- `IPv4Destinations`
- A list of routes in the form `{ "a.b.c.d/e": "EncryptionPublicKey", ... }`
- For each entry, an IPv4 route entry will be created that sends traffic destined for `a.b.c.d/e` to the node with the specified `EncryptionPublicKey` (effectively your "remote" ranges).
- `IPv4Sources`
- A list of allowed source subnets in the form `[ "a.b.c.d/e" ]`
- Specifies a list of source IPv4 addresses which are allowed to be sent over the tunnel (essentially your "local" ranges).
- `SwitchOptions`
- Switch options are advanced tuning settings. Ordinarily you should not attempt to change these from their defaults.
- Contains the following configuration options:
- `MaxTotalQueueSize`
- The maximum allowed size, in bytes, of all local switch queues combined. Default is `4194304` (or 4MB).
# Use Cases