cwinfo/yggdrasil-network.github.io
5
0
Fork 0
mirror of https://github.com/cwinfo/yggdrasil-network.github.io.git synced 2024-11-09 16:50:31 +00:00
Code Releases Activity
479fba8979
yggdrasil-network.github.io/platforms.md
Neil Alexander 479fba8979
Update platforms.md
2018-03-11 10:24:15 +00:00

3.3 KiB
Raw Blame History

Platforms

Linux

  • Should work out of the box on most Linux distributions with iproute2 installed.
  • systemd service scripts are included in the contrib/systemd/ folder so that it runs automatically in the background (using /etc/yggdrasil.conf for configuration), copy the service files into /etc/systemd/system, copy yggdrasil into your $PATH, i.e. /usr/bin, and then enable the service:
systemctl enable yggdrasil
systemctl start yggdrasil
  • Once installed as a systemd service, you can read the yggdrasil output:
systemctl status yggdrasil
journalctl -u yggdrasil

macOS

  • Tested and working out of the box on macOS 10.13 High Sierra.
  • May work in theory on any macOS version with utun support (which was added in macOS 10.7 Lion), although this is untested at present.
  • TAP mode is not supported on macOS.

FreeBSD, NetBSD

  • Works in TAP mode, but currently doesn't work in TUN mode.
  • You may need to create the TAP adapter first if it doesn't already exist, i.e. ifconfig tap0 create.

OpenBSD

  • Works in TAP mode, but currently doesn't work in TUN mode.
  • You may need to create the TAP adapter first if it doesn't already exist, i.e. ifconfig tap0 create.
  • OpenBSD is not capable of listening on both IPv4 and IPv6 at the same time on the same socket (unlike FreeBSD and NetBSD). This affects the Listen and AdminListen configuration options. You will need to set Listen and AdminListen to use either an IPv4 or an IPv6 address.
  • You may consider using relayd to allow incoming Yggdrasil connections on both IPv4 and IPv6 simultaneously.

Windows

  • Tested and working on Windows 7 and Windows 10, and should work on any recent versions of Windows, but it depends on the OpenVPN TAP driver being installed first.
  • Has been proven to work with both the NDIS 5 (tap-windows-9.9.2_3) driver and the NDIS 6 (tap-windows-9.21.2) driver, however there are substantial performance issues with the NDIS 6 driver therefore it is recommended to use the NDIS 5 driver instead.
  • Be aware that connectivity issues can occur on Windows if multiple IPv6 addresses from the fd00::/8 prefix are assigned to the TAP interface. If this happens, then you may need to manually remove the old/unused addresses from the interface (though the code has a workaround in place to do this automatically in some cases).
  • TUN mode is not supported on Windows.
  • Yggdrasil can be installed as a Windows service so that it runs automatically in the background. From an Administrator Command Prompt:
sc create yggdrasil binpath= "\"C:\path\to\yggdrasil.exe\" -useconffile \"C:\path\to\yggdrasil.conf\""
sc config yggdrasil displayname= "Yggdrasil Service"
sc config yggdrasil start= "auto"
sc start yggdrasil
  • Alternatively, if you want the service to autoconfigure instead of using an yggdrasil.conf, replace the sc create line from above with:
sc create yggdrasil binpath= "\"C:\path\to\yggdrasil.exe\" -autoconf"

EdgeRouter

  • Tested and working on the EdgeRouter X, using the vyatta-yggdrasil wrapper package.